Creating Data Discs; Making A Disc Label Using Lightscribe Technology - HP Pavilion a6330 Getting Started

Creating data discs

This section provides instructions for burning data files onto a disc.
To create a data disc:
1 Insert a writable disc into the disc-burning drive.
2 Click the Windows Start Button
click CyberLink DVD Suite.
3 Click the icon in the lower-right corner of the window to open a list of CyberLink
programs, and then click Power2Go.
4 Click the Data Disc icon.
5 Select disc type, and then click OK.
6 Locate files from the hard disk drive, and then click and drag them to the lower section
of the window.
7 When you are done adding files, click the Burn icon in the toolbar.
NOTE: For more help using CyberLink Power2Go, click the Help icon in the
program.
8 Select the recording options.
9 Click Burn to begin recording your music files to disc.
10 Click OK when the data disc is completed.

Making a disc label using LightScribe Technology

(Select models only)
The following section provides instructions for making a disc label by using LightScribe
technology. For instructions on making a paper label, refer to "Making a paper disc
label."
What is LightScribe?
LightScribe is an innovative technology that uses a special disc drive, special media
(CDs or DVDs), and label-making software to burn labels directly onto CDs and DVDs. A
LightScribe-enabled CD or DVD disc drive uses the optical laser in the drive to burn a label
onto a thin dye coating on the label side of the disc. There is no ink to smear or paper to
curl, and there are no adhesives to loosen.
on the taskbar, All Programs, and then
Creating Audio and Data Discs
175