Removing An Expansion Card - HP Brio BA Upgrade Manual

Removing an Expansion Card

You will need to have removed the cover. Refer to "Removing the Cover" on page 8.
For you safety, disconnect the power cord and all external cables.
Caution
1 Locate the expansion card.
2 Remove the expansion card's fixing screw. Refer to step 2 on page 42.
3 Place a blanking plate in the computer if available.
4 Replace the fixing screw.
5 Replace the cover. Refer to "Replacing the Cover" on page 10.
Replacing Expansion Cards
Removing an Expansion Card
43