Compaq A1000 User Manual page 68

6\PSWRP
Printer is on, but nothing prints.
Printer seems to be printing, but no
characters are printing.
Unexpected characters print or characters
are missing.
Printer prints very slowly.
The Control Panel does not respond.
Making a local copy at 100% does not print
on a single sheet although the same size
paper is in the paper input tray.
Page does not print.
The A1000 doesnot respond.
66
3ULQWLQJ#DQG#&RS\LQJ#3UREOHPV
6ROXWLRQ
The printer may be improperly connected to the computer. Check the cable
connections at the All-In-One and at the computer.
Make sure that the printer cable is a standard USB cable.
The USB cable may be defective. Try another cable.
Make sure your application has the A1000 selected as the default printer.
Make sure there is paper in the paper input tray.
Make sure that the paper path is not blocked.
Be sure the tape covering the nozzle of the print cartridge has been removed.
The print cartridge may be out of ink.
Make sure that your application has the A1000 selected as the default printer.
Check the USB cable connections.
The print head may need to be cleaned. See "Cleaning Print Cartridges" section.
You may be using "High" print quality. Adjust your Print Quality settings to
NORMAL or QUICK PRINT.
Graphics print more slowly than text.
Color prints more slowly than black.
Special media prints more slowly than plain paper.
If printing in black, make sure photo cartridge is not installed.
Open applications affect print speed. Close other running programs if they are not
required.
Unplug the A1000 power cord, then plug it back in.
The A1000 does not know the paper size that is loaded in the printer output tray.
Press Setup, use the menu key to select the Paper Size menu. Press the Options
button until the correct paper size (letter, legal, A4) is displayed.
Complicated page formats may not be printable on the printer. Too many fonts
and/or complex graphics can cause this problem. Simplify your page.
Unplug the A1000's USB cable for at least 10 seconds, then reconnect.
Unplug the A1000 power cord, then plug back in.
Restart Windows.