Compaq A1000 User Manual page 63

Hp compaq a1000: users manual
Hide thumbs Also See for Compaq A1000:
Table of Contents

Advertisement

6<0372020(66$*(
"LOAD DOCUMENT" with beep warning
tone and return to READY state.
"ADD PAPER" with beep warning tone and
return to READY state.
"RESOURCE BUSY, TRY LATER" with beep
warning tone and return to prior state.
"REMOVE PAPER JAM THEN PRESS
CLEAR"
"DOCUMENT OUT, PLEASE WAIT"
"CLR DOCUMENT JAM"
"PC NOT AVAILABLE" displayed on the LCD
panel with a beep warning tone and return
to READY state.
"ADD PAPER THEN PRESS FORM FEED"
"ADD PAPER THEN PRESS FORM FEED"
with beep warning tone and return to
READY state.
"MEMORY TO PRINT"
"MEMORY FULL!"
"MEMORY FULL, TO CONTINUE, START"
7URXEOHVKRRWLQJ#(UURU#0HVVDJHV
&RS\#0HVVDJHV
&$86(
Tried to start a copy operation before
loading the document.
Tried to start a copy operation with no
paper in the paper input tray.
Tried to copy when the scanner is in use.
Tried to copy when printer is in use.
Tried to start a computer-assisted copy
while parallel port is in use by another
task.
Paper jam occurred in paper path.
STOP pressed after paper is loaded.
A document jam or a very long document
was scanned.
Computer is not available for a copy task
that required computer assistance (multiple
photo or color copies).
Making copies without paper and collate
on.
Making copies without paper and collate
off.
Starting a copy collate or multiple copy
operation while the printer is busy.
Collate is off and insufficient memory to
copy current sheet of document.
During a multiple copy operation, the
memory became full.
62/87,21
Load document to be copied before
pressing START.
Load paper in the input tray.
Verify that the computer is connected and
available.
Wait for resource to become free then try
again.
Clear paper jam, then press CLEAR /STOP.
See "Clearing Documents and Paper Jam"
section.
Wait for all document(s) in the document
input tray to be fed to the document output
tray.
Open the control panel and remove
document or jam.
Verify that the computer is connected and
available.
Make sure the cables are connected, the
computer is on and not in sleep mode.
Retry when the computer is available.
Add paper, press Form Feed and printing
will continue.
Add paper before attempting to copy.
Copy job will complete when print job is
finished.
Job will be automatically aborted. Retry
when more memory becomes available.
Press START to print (collated) the current
full pages scanned so far, then continue
the scanning process.
Press STOP to cancel the copy operation.
Note: Selecting a single copy, turning Copy
Collate off, or selecting Copy Print Order as
scanned will reduce the memory
requirement of the selected copy operation.
61

Advertisement

Table of Contents
loading

This manual is also suitable for:

A1000

Table of Contents