Related Manuals for CareCo Boston FN01010007
Summary of Contents for CareCo Boston FN01010007
- Page 1 Scan me on your phone camera to watch our assembly video. USER MANUAL FN01010007 PRODUCT CODE:...
- Page 2 Boston Riser Recliner, ensuring you’ll be able to enjoy all of its features for years to come. If any additional assembly, disassembly and/or operation assistance is required, please contact CareCo. CareCo (UK) Limited, 1 Turing Court, Tel: 0333 015 5000 Great Notley, Braintree, CM77 7AT www.CareCo.co.uk...
- Page 3 BEFORE USE READ THIS USER MANUAL CAREFULLY RETAIN THIS USER MANUAL FOR FUTURE REFERENCE KEY DEFINITIONS This user manual contains warnings and suggestions marked with the following symbols: WARNING! Highlights a potentially hazardous condition/situation for the user and/or product. SUGGESTION General suggestions and advice for operating the product. Need help with assembly? We’ve put together a step-by-step assembly guide to help you get your product set up safely and correctly.
-
Page 4: Table Of Contents
FN01010007 PRODUCT CODE CONTENTS GETTING STARTED CARTON CONTENTS PRODUCT COMPONENTS SETTING UP YOUR ELIXIR PRO BATHLIFT HOW TO USE YOUR RISER RECLINER USER INSTRUCTIONS RISE & RECLINER HANDSET CONTROLS TRANSFORMER INSTALLING THE BACK-UP BATTERY OPTIONAL EXTRAS DISASSEMBLY & TRANSPORTATION DISASSEMBLY INSTRUCTIONS TRANSPORTATION LOOKING AFTER YOUR RISER RECLINER UPHOLSTERY CARE... - Page 5 MAINTENANCE MAINTENANCE SCHEDULE REPAIRS TROUBLESHOOTING WARNINGS & TECHNICAL INFORMATION SPECIFICATIONS ELECTROMAGNETIC INTERFERENCE (EMI) PRODUCT RE-ISSUING RECYCLING & DISPOSAL INTENDED USE INTENDED ENVIRONMENT PRODUCT IDENTIFICATION MODIFICATIONS GENERAL WARNINGS EXPECTED LIFETIME WARRANTY NOTES...
-
Page 6: Getting Started
FN01010007 PRODUCT CODE GETTING STARTED CARTON CONTENTS Contact CareCo immediately if ITEM NUMBER DESCRIPTION QUANTITY any of the listed contents are Seat base missing. Backrest We strongly recommend that Rise & recline handset you keep the box and internal Transformer... - Page 7 SETTING UP YOUR BOSTON RISER RECLINER 1. Remove all riser recliner components 2. Lift the power cable away from the seat from the outer packaging and place them base prong and place to one side. onto a level surface. 3. Lower the backrest onto the seat base 4.
-
Page 8: How To Use Your Riser Recliner
FN01010007 PRODUCT CODE 5. Connect the power cable to the 6. Connect the mains plug to a nearby wall transformer and mains plug. socket and switch [ON]. HOW TO USE YOUR RISER RECLINER USER INSTRUCTIONS CLEAR ZONE Position the chair on a level surface with enough space to rise &... -
Page 9: Sitting Down
SITTING DOWN Ensure the riser recliner chair’s backrest is in the upwards position and the footrest is in the downwards position. Gradually move backwards, using the armrests for support if needed before lowering into the seat. BODY POSITIONING Sit centrally within the chair and maintain a neutral posture. Avoid leaning forwards and sideways. -
Page 10: Rise & Recliner Handset Controls
FN01010007 PRODUCT CODE RISE & RECLINER HANDSET CONTROLS Press the appropriate button to complete the desired action: 1. Raises Chair (Lowers footrest, raises backrest, raises chair) 2. Reclines Chair (Raises footrest, reclines backrest, lowers chair) TRANSFORMER The riser recliner chair transformer is fitted with an LED indicator that indicates when the power is [ON] and when the power is [OFF]. -
Page 11: Installing The Back-Up Battery
5. Plug the power lead into a wall socket. OPTIONAL EXTRAS ARM & HEADREST COVERS Keep your recliner looking as good as new with the additional arm & headrest covers. CARECO FABRIC CARE KIT Remove stubborn stains and odours with the CareCo Fabric Care Kit. -
Page 12: Disassembly & Transportation
FN01010007 PRODUCT CODE DISASSEMBLY & TRANSPORTATION DISASSEMBLY INSTRUCTIONS 1. Disconnect the chair from the wall socket, 2. Release the locking clips on either side of then place the transformer and power the backrest whilst pulling the backrest cable into the chair’s side pocket. upwards. -
Page 13: Transportation
TRANSPORTATION If for any reason the riser recliner chair needs to be transported via motor vehicle, ensure the disassembled components are properly secured before transport to avoid transit damage. LOOKING AFTER YOUR RISER RECLINER WARNING! Personal injury or fire damage can occur if the chair comes into direct contact with a heat source. -
Page 14: Deep Cleaning
If there are unusual grinding noises, jerky movements, or persistent problems with the recliner’s scissor mechanism, contact CareCo. Do not exceed the weight limit specified. WARNING! Take care when adjusting positions to avoid trapping or pinching of body... -
Page 15: Electronics Care
Check for damage regularly following the maintenance schedule found within this user manual. If there is damage to the electronics, unplug the riser recliner from the wall socket and contact CareCo. Keep all electronics away from moisture and extreme temperatures. -
Page 16: Maintenance Schedule
Certain riser recliner components can be repaired by the user with guidance provided by CareCo. Other components can only be repaired/replaced by a service technician. If for any reason the riser recliner requires repair due to a defect, contact CareCo immediately. -
Page 17: Troubleshooting
TROUBLESHOOTING The below table is to be used as a guide to make the recliner chair operational again. If after troubleshooting the recliner chair still does not operate, contact CareCo. SYMPTOM POSSIBLE CAUSE POSSIBLE REMEDY Check for any loose connections and... -
Page 18: Specifications
FN01010007 PRODUCT CODE WARNINGS & TECHNICAL INFORMATION SPECIFICATIONS OVERALL CHAIR LENGTH (SITTING) (MM) OVERALL CHAIR LENGTH (RECLINED) (MM) 1570 OVERALL CHAIR HEIGHT (SITTING) (MM) 1040 OVERALL CHAIR HEIGHT (LIFTED) (MM) 1380 OVERALL CHAIR WIDTH (MM) SEAT WIDTH (MM) SEAT DEPTH (MM) SEAT HEIGHT (MM) FOOTREST MAXIMUM HEIGHT (MM) MAXIMUM USER WEIGHT (KG) -
Page 19: Electromagnetic Interference (Emi)
ELECTROMAGNETIC INTERFERENCE (EMI) Riser Recliner chairs may be susceptible to electromagnetic interference (EMI). Electromagnetic energy (EM) is emitted from sources such a radio stations, TV stations, amateur radio (HAM) transmitters, two-way radios, and cellular phones. The interference (from radio wave sources) can cause the riser recliner to move by itself or cause permanent damage to the riser recliner’s internals. -
Page 20: Intended Environment
RECYCLING & DISPOSAL When disposing of the riser recliner and/or its components, users should follow local disposal/ recycling regulations. Contact CareCo if further advice is needed regarding recycling & disposal. INTENDED USE To assist an individual when sitting, standing, and resting. -
Page 21: General Warnings
GENERAL WARNINGS • Plug the power lead directly into a wall outlet. Avoid using extension leads. • Do not disconnect the plug from the wall outlet by pulling the power cable. • Periodically check the handset and power leads for visible damage. •... -
Page 22: Expected Lifetime
FN01010007 PRODUCT CODE EXPECTED LIFETIME The Expected Lifetime is the estimated period of time for which the riser recliner is expected to function according to its intended use. Various items such as weight capacity, user behaviour, and intensity of use can affect the expected lifetime. -
Page 23: Warranty
Parts that have been purchased by the end user after the original warranty period has expired have a warranty period of 12 months. CareCo is not responsible if the riser recliner requires repair or replacement as a direct result of: •... - Page 24 24 05 01...
Need help?
Do you have a question about the Boston FN01010007 and is the answer not in the manual?
Questions and answers