To Identify Connectors For External Devices - HP OmniBook 4100 Reference Manual

Making Connections

To identify connectors for external devices

The following graphic describes the available connectors for external devices. Refer
to it, if necessary, when following the procedures in this section.
1. Infrared port. Windows NT 4.0 does not support infrared communication.
Use this port for wireless data transmission between the OmniBook and another
computer or a printer with an infrared port. You must install infrared drivers.
2. Kensington lock slot (security connector).
3. Parallel port (LPT1).
Use this port for a parallel printer, other parallel device, or to connect the floppy
disk drive externally.
4. Serial port (COM1).
Use this port for a serial mouse, a modem, a serial printer, or other serial device.
5. External monitor port.
6. Docking port.
4-8