Advertisement
Quick Links
EDAN Agile PLM Electronic Signature Information
--Signatures related to this document and performed in EDAN Agile PLM.
文件名称：MT-201台车安装指南_英文
文件编号：01.54.111836
版本：2.5
产品型号：MT-201台车
项目编码(Project Code)：2082C-2000
签批信息:
作者 : 严 慧敏 (yanhuimin)
审核人 : 兰 小燕 (lanxiaoyan)
审核人 : 吴 明花 (wuminghua)
审核人 : 陈 浩杰 (chenhaojie)
批准人 : 肖 文聪 (xiaowencong)
批准人 : 沈 东雪 (shendongxue)
版权©深圳市理邦精密仪器股份有限公司 (Copyright©Edan Instrument,Inc.)
2021-06-21 17:18:43
2021-06-23 08:41:24
2021-06-22 16:33:01
2021-06-21 17:43:09
2021-06-28 15:28:56
2021-06-28 16:59:47
Advertisement
Related Manuals for EDAN MT-201
Summary of Contents for EDAN MT-201
- Page 1 EDAN Agile PLM Electronic Signature Information --Signatures related to this document and performed in EDAN Agile PLM. 文件名称：MT-201台车安装指南_英文 文件编号：01.54.111836 版本：2.5 产品型号：MT-201台车 项目编码(Project Code)：2082C-2000 签批信息: 作者 : 严 慧敏 (yanhuimin) 2021-06-21 17:18:43 审核人 : 兰 小燕 (lanxiaoyan) 2021-06-23 08:41:24 审核人 : 吴 明花 (wuminghua) 2021-06-22 16:33:01 审核人...
-
Page 3: Table Of Contents
Table of Contents Standard ..................1 Optional ..................3 Symbols ..................4 Assembling Trolley ................. 5 Adjusting the Height of the Top Splint Board ........7 Fixing the Electrocardiograph to the Trolley........9 Fixing the Tablet Mounting Bracket to the Trolley ......10 Fixing New Type of Tablet Mounting Bracket and Lead Wire Hose Bracket to the Trolley .............. -
Page 4: Standard
MT-201 Trolley Installation Guide Standard Major Parts Name Qty(pcs) Remarks Top splint board Link board for 12-lead resting electrocardiograph Including casters Chassis Square basket Stand post assembly Tablet mounting bracket Applicable to the tablet specified by EDAN Clamp (two sizes) - Page 5 MT-201 Trolley Installation Guide or without handle Applicable to iSE with iSE link board thermal printer Accessories Spares Remarks Name (pcs) (pcs) M5×14 screw Used for link M3×10 cross recessed pan board—#2 head cap screw major part 17# /19# normal open-end spanner Ф12 spring washer + plain...
-
Page 6: Optional
MT-201 Trolley Installation Guide Optional Major Parts Name Qty (pcs) Bracket pedestal Semicircular basket Locking flange for semicircular basket Lead wire bracket Bracket link board Accessories Spares Name Qty (pcs) (pcs) Ф10 plain washer Bracket fastener M5×25 screw M10 lock nut NOTE: Spare parts are provided in the package. -
Page 7: Symbols
MT-201 Trolley Installation Guide installed before sale are not listed. The optional parts could be purchased at will. The size of screws is varied according to the electrocardiograph model. Symbols No pushing No sitting No stepping on surface Caution MANUFACTURER... -
Page 8: Assembling Trolley
MT-201 Trolley Installation Guide WARNING The assembling and disassembling of the trolley should be performed by service personnel authorized by the manufacturer. Assembling Trolley NOTE: Use a crosshead screw driver to secure all the screws tight when assembling the trolley. Step 2-3 are needed only if the lead wire bracket package is provided. - Page 9 MT-201 Trolley Installation Guide into the groove of the chassis. Make sure they are jointed well. Put a Ф10 spring washer and a Ф10 plain washer on the M10×60 bolt. Use an 8mm hexagon spanner to fix the bolt to the central hole in the chassis from the bottom.
-
Page 10: Adjusting The Height Of The Top Splint Board
MT-201 Trolley Installation Guide level the basket at the flanges and fix them with two M5×14 screws. Adjusting the Height of the Top Height Adjustment Splint Board Handle Loosen the Height Adjustment Handle on the joint of the posts by hand, move the top post to a proper height and then tighten the handle again. - Page 11 MT-201 Trolley Installation Guide Trolley Assembly...
-
Page 12: Fixing The Electrocardiograph To The Trolley
MT-201 Trolley Installation Guide Fixing the Electrocardiograph to the Trolley Fig. 1 NOTE: MT-201 Trolley is applicable to SE-12, SE-1200, SE-1200 Express, SE-1201, SE-601 series, SE-1, SE-100 ， SE-3 ， Fig. 2 SE-300 series, SE-301, and iSE series; but not applicable to SE-12 Express. -
Page 13: Fixing The Tablet Mounting Bracket To The Trolley
MT-201 Trolley Installation Guide case series electrocardiograph, upturn electrocardiograph. Align the link board with the screw holes. Fix them with four M3×12 screws. See the figures below. M3×12 screws (4pcs) Turn over the electrocardiograph, Lift it and slide the link board into the groove of the top splint board sideways. - Page 14 MT-201 Trolley Installation Guide board goes halfway, pull down the pin on the back of the top splint board to allow the link board to go through. Keep pushing the link board in until the pin rebounds and clicks into the hole.
-
Page 15: Fixing New Type Of Tablet Mounting Bracket And Lead Wire Hose Bracket To The Trolley
MT-201 Trolley Installation Guide The following content is needed only if the new tablet mounting bracket and lead wire hose bracket package are configured. Fixing New Type of Tablet Mounting Bracket and Lead Wire Hose Bracket to the Trolley Optional... - Page 16 MT-201 Trolley Installation Guide type of tablet mounting bracket and lead wire hose bracket Accessories Spares Name Qty (pcs) (pcs) Ф10 plain washer Bracket fastener M5×25 screw M10 lock nut M5×16 hexagon socket head cap screw NOTE: Spare parts are provided in the package. Refer to the above table for the number of screws actually needed.
- Page 17 MT-201 Trolley Installation Guide To assemble new type of tablet mounting bracket assembly: 1. Fasten the front and back locking flanges to the stand post with two M5×25 screws. The flanges are above the place where the square basket fixed.
- Page 18 MT-201 Trolley Installation Guide bracket fastener. 6. Place a tablet (about the size of 10.1 to 12.3 inches) onto the new type of mounting bracket. Use the 4mm hexagon spanner to fasten the screws. See the right figure for completed assembly.
- Page 19 MT-201 Trolley Installation Guide Total assembly WARNING The safe load of the top splint board and the basket is 11 kg and 2.5 kg respectively. Overweight may cause the device to lose balance and even fall over. When adjusting the height of the trolley, please remove the device and hold the stand post steadily to avoid nipping your fingers.
Need help?
Do you have a question about the MT-201 and is the answer not in the manual?
Questions and answers