Connecting the Network Cable
A network cable has an 8-pin RJ-45 network connector at each
end and may contain noise suppression circuitry, which prevents
interference with TV and radio reception. To connect the cable:
1. Identify the RJ-45 network jack 1 on the notebook.
2. Orient the end of a network cable with noise suppression
circuitry 2 toward the notebook.
3. Plug the network cable into the notebook RJ-45
network jack 3.
4. Plug the other end of the cable into the network
RJ-45 jack 4.
Connecting a network cable
WARNING: To reduce the risk of electric shock, disconnect the
Å
network cable before accessing an internal compartment of the
notebook. Internal compartments include the memory compartment
and the battery and hard drive bays.
Startup and Reference Guide—Part 2
Communications
7–11