Software Updates, Restorations and Utilities
Navigating and Selecting in the Setup Utility
Because the Setup utility is not Windows-based, it does not
support the TouchPad. Navigation and selection are by keystroke.
To navigate, use the up and down arrow keys or
To select an item, use the arrow keys to select the item, then
press
To close a display but remain in the Setup utility, press
An on-screen guide to navigation and selection is displayed at the
lower edge of most Setup utility submenu screens. To minimize
keystrokes by using the <Alt> Key Activates Accelerators
feature:
1. Press and hold
is highlighted.)
2. Press the keyboard key corresponding to the highlighted
letter or number in the item you want to select.
For example, to select an on-screen OK button, press
When the "O" in OK is highlighted, press
Restoring Setup Utility Default Settings
To return all Setup utility settings to default values, select File
menu > Restore Defaults. (Identification information, including
ROM version information, is retained.)
Exiting the Setup Utility
The Setup Utility exit options are on the File menu. When you
select either option, Windows opens after the Setup utility closes.
To close the utility and save your changes from the current
session, select Save changes and exit.
To close the utility without saving changes from the current
session, select Ignore changes and exit.
9–12
.
enter
(A letter or number in most on-screen items
alt.
O.
Startup and Reference Guide—Part 2
tab.
esc.
alt.
Need help?
Do you have a question about the Compaq NX7000 and is the answer not in the manual?