Removing A Cd Or Dvd (With Power) - HP Compaq NC6140 Hardware Manual

Drives

Removing a CD or DVD (With Power)

If power is available:
1. Be sure the notebook is on.
2. Press the release button 1 on the drive bezel to release the
media tray, then pull the tray outward until it is fully
extended 2 .
3. Remove the disc from the tray 3 by gently pushing down on
the spindle while pulling up on the outer edges of the disc.
If the media tray is not fully extended, tilt the disc as you
remove it. Handle the disc by the edges, not the flat surfaces.
4. Close the media tray.
5. Place the disc in a protective case.
Removing a CD or DVD from an optical drive when power is
available
4–6 Hardware Guide