HP Compaq NC6140 Hardware Manual page 30

Fn+F2
Setup is a non-Windows utility. For more information about using
Computer Setup, see the Software Guide, Chapter 4, "Setup
Utilities and Diagnostics," on this CD.
1. To open Computer Setup, turn on or restart the notebook,
then press
displayed in the lower left of the screen.
❏
❏
2. Use the arrow keys to select the Security menu, then
press
3. Use the arrow keys to select Device Security, then press
4. Select MultiPort Fn+F2. The status of the device in the
MultiPort is displayed at the bottom of the screen.
5. To change the status of the device in the MultiPort, press the
Fn+F2
whichever status is selected at the time that the
are disabled.)
6. To disable the
MultiPort Fn+F2 to Disable. (To reenable the
set this status field to Enable.)
7. To confirm your settings, press
8. To exit Computer Setup, use the arrow keys to select an exit
option from the File menu, then follow the instructions on
the screen.
Your preference is set as you exit Computer Setup and is in effect
when the notebook restarts.
Hardware Guide
hotkeys preferences are set in Computer Setup. Computer
while the F10 = ROM Based Setup message is
F10
To change the language, press
To view navigation information, press
enter.
hotkeys. (The device in the MultiPort will remain in
Fn+F2
Pointing Device and Keyboard
F2.
hotkeys, set the status field beside
F10.
F1.
enter.
hotkeys
Fn+F2
hotkeys,
Fn+F2
2–7