Removing A Disc (With Power) - HP Compaq Notebook Series Startup Manual

CPQ-311245-001.book Page 6 Tuesday, April 1, 2003 3:55 PM
Drives and Drive Media

Removing a Disc (With Power)

1. Turn on the notebook.
2. Press the release button 1 on the drive bezel to release the
media tray, then pull the tray outward until it is fully
extended 2.
3. Remove the disc from the tray by gently pushing down on the
spindle while pulling up on the outer edges of the disc 3.
Handle the disc by the edges, not the flat surfaces. If the
media tray is not fully extended, tilt the disc as you remove it.
4. Close the media tray 4.
5. Place the disc in a protective case.
Removing a disc from the optical drive when power is available
5–6 Startup and Reference Guide—Part 2