B Power Cord Set Requirements; 3-Conductor Power Cord Set; General Requirements - Compaq Armada 110 Maintenance And Service Manual

Power Cord Set Requirements

3-Conductor Power Cord Set

The wide range input features enable the computer to operate
from any line voltage from 100 to 120 or 220 to 240 volts AC.
The power cord set received with the computer meets the
requirements for use in the country where the equipment is
purchased.
Power cord sets for use in other countries must meet the
requirements of the country where the computer is used. For more
information on power cord set requirements, contact a Compaq
authorized reseller or service provider.

General Requirements

The requirements listed below are applicable to all countries:
1. The length of the power cord set must be at least 5.00 feet
(1.5 m) and a maximum of 6.50 feet (2.0 m).
2. All power cord sets must be approved by an acceptable
accredited agency responsible for evaluation in the country
where the power cord set will be used.
Maintenance and Service Guide
B
B–1