ELEGANT S56 Quick Start Manual

The LED Controller S56 allows for controlling digital LED strips (pixels) using momentary push buttons. The connected
buttons are used to select the controller's functions. The controller has over 90 built-in effects.
Controller Versions (written on the casing):
S56-1000M Music Version: 1000 LED pixels (100m of WS2811 digital strip or 33m of WS2812 strip)
NOTE: All versions of the controller have two outputs. If it is stated that the controller supports, for example, 1000
pixels, it means that each output has a signal for 500 pixels. The given lengths refer to a strip with 30 LEDs/m.
Music-Responsive Controllers (Music Version):
The music controller automatically detects the tempo of the track and adjusts its sensitivity to the volume. The quality
of synchronization with the music depends on the genre. The controller is optimized for disco/dance music (with a clear,
regular rhythm). The controller "listens" to the bass and, therefore, will not pick up music played from small speakers
(laptop, phone).
Memory Settings: The controller remembers settings 10 seconds after the last use of the buttons.
Connecting momentary push buttons.
A keyboard in the form of momentary push buttons can be connected to the controller.
Example connection.
The inputs for the buttons are labeled as IN1,
depending on whether they are pressed briefly or held down. The functions of the individual buttons are presented in the
table below.
Short press of the button
Input 1
Input 2
Input 3 Switch to previous program
Input 4
Input 5 Change the speed from fastest to slowest
Change the color saturation. Adjusts the color
Input 6
saturation from highest to lowest.
Input 7
Changes color, opposite direction to input 4
LED CONTROLLER S56
IN
Turn on/off lighting
Switch to next program
Change color
2, IN 3, IN 4, IN 5, IN 6, IN
After the maximum dimming, it brightens again
Switch to static light program (no animation)
Turn on the white light. Longer hold changes the shade of white from warm to
Change the color saturation. Adjusts the color saturation from highest to
7. The buttons can perform different functions
Long press the button
Adjusts the brightness (dims).
No function
cold
No function
lowest.
No function