Gigabyte GA-X48-DS4 User Manual page 88

Step 3:
When a screen as shown in Figure 8 appears, select Intel(R) ICH8R/ICH9R SATA RAID Controller
and press Next.
Step 4:
After the driver is loaded, select the RAID/AHCI drive(s) where you want to install the operating system
and then press Next to continue the OS installation (Figure 9).
(Note) The item displayed in Figure 8 will be shown as Intel(R) ICH9 SATA AHCI Controller
when the SATA controllers are set to AHCI mode.
GA-X48-DS4 Motherboard
Figure 8
Figure 9
- 88 -
(Note)