Gigabyte GA-X48-DS4 User Manual page 86

Step 4:
After the SATA RAID/AHCI driver installation is completed, you can proceed with the Windows XP
installation.
WindowsXP Professional Setup
Welcome to Setup.
This port of the Setup program prepares Microsoft(R)
Windows (R) XP to run on your computer.
Enter= Continue
GA-X48-DS4 Motherboard
To set up Windows XP now, press ENTER.
To repair a Windows XP installation using
Recovery Console, press R.
To quit Setup without installing Windows XP, press F3.
R=Repair F3=Exit
Figure 5
- 86 -