Integrated Peripherals - Gigabyte GA-X48-DS4 User Manual

Lga775 socket motherboard for intel core processor family/intel pentium processor family/intel celeron processor family
Hide thumbs Also See for GA-X48-DS4:
Table of Contents

Advertisement

2-5

Integrated Peripherals

SATA RAID/AHCI Mode
SATA Port0-3 Native Mode
USB Controller
USB 2.0 Controller
USB Keyboard Support
USB Mouse Support
Legacy USB storage detect
Azalia Codec
Onboard H/W 1394
Onboard H/W LAN1
Onboard H/W LAN2
SMART LAN1
SMART LAN2
Onboard LAN1 Boot ROM
Onboard LAN2 Boot ROM
Onboard IDE Controller
Onboard Serial Port 1
Onboard Parallel Port
Parallel Port Mode
: Move
Enter: Select
F5: Previous Values
SATA RAID/AHCI Mode (Intel ICH9R Southbridge)
Enables or disables RAID for the SATA controllers integrated in the Intel ICH9R Southbridge or
configures the SATA controllers to AHCI mode.
Disabled
AHCI
RAID
SATA Port0-3 Native Mode (Intel ICH9R Southbridge)
Specifies the operating mode of the integrated SATA controllers.
Disabled
Enabled
USB Controller
Enables or disables the integrated USB controller. (Default: Enabled)
Disabled will turn off all of the USB functionalities below.
USB 2.0 Controller
Enables or disables the integrated USB 2.0 controller. (Default: Enabled)
USB Keyboard Support
Allows USB keyboard to be used in MS-DOS. (Default: Disabled)
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
Integrated Peripherals
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Disables RAID for the SATA controllers and configures the SATA controllers to
PATA mode. (Default)
Configures the SATA controllers to AHCI mode. Advanced Host Controller
Interface (AHCI) is an interface specification that allows the storage driver to
enable advanced Serial ATA features such as Native Command Queuing and
hot plug.
Enables RAID for the SATA controllers.
Allows the SATA controllers to operate in Legacy IDE mode.
In Legacy mode the SATA controllers use dedicated IRQs that cannot be shared
with other device. Set this option to Disabled if you wish to install operating
systems that do not support Native mode, e.g. Windows 9X/ME. (Default)
Allows the SATA controllers to operate in Native IDE mode.
Enable Native IDE mode if you wish to install operating systems that support
Native mode, e.g. Windows XP/2000.
[Disabled]
[Disabled]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Enabled]
[Auto]
[Enabled]
[Enabled]
[Enabled]
[Press Enter]
[Press Enter]
[Disabled]
[Disabled]
[Enabled]
[3F8/IRQ4]
[378/IRQ7]
[SPP]
F10: Save
- 43 -
Item Help
Menu Level
ESC: Exit
F1: General Help
F7: Optimized Defaults
BIOS Setup

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents