Standard Cmos Features - Gigabyte GA-X48-DS4 User Manual

2-3

Standard CMOS Features

Date (mm:dd:yy)
Time (hh:mm:ss)
IDE Channel 0 Master
IDE Channel 0 Slave
IDE Channel 1 Master
IDE Channel 1 Slave
IDE Channel 2 Master
IDE Channel 3 Master
IDE Channel 4 Master
IDE Channel 4 Slave
Drive A
Floppy 3 Mode Support
Halt On
Base Memory
Extended Memory
: Move Enter: Select
F5: Previous Values
Total Memory
: Move Enter: Select
F5: Previous Values
Date
Sets the system date. The date format is week (read-only), month, date and year. Select the
desired field and use the up arrow or down arrow key to set the date.
Time
Sets the system time. For example, 1 p.m. is 13:0:0. Select the desired field and use the up arrow
or down arrow key to set the time.
IDE Channel 0/1 Master/Slave
IDE HDD Auto-Detection
Press <Enter> to autodetect the parameters of the IDE/SATA device on this channel.
IDE Channel 0/1 Master/Slave
Configure your IDE/SATA devices by using one of the three methods below:
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
Standard CMOS Features
+/-/PU/PD: Value
F6: Fail-Safe Default
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
Standard CMOS Features
+/-/PU/PD: Value
F6: Fail-Safe Default
Mon, Nov 26 2007
18:25:04
[None]
[None]
[None]
[None]
[None]
[None]
[None]
[None]
[1.44M, 3.5"]
[Disabled]
[All, But Keyboard]
640K
510M
F10: Save
512M
F10: Save
- 39 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup