Table of Contents
Advertisement
2-8
PC Health Status
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
Reset Case Open Status
Case Opened
Vcore
DDRII 1.8V/DDR 2.6V
+3.3V
+12V
System Temperature
CPU Temperature
Current SYS FAN Speed
Current CPU FAN Speed
System Warning Temp.
CPU Warning Temp.
SYS FAN Fail Warning
CPU FAN Fail Warning
CPU Smart FAN Control
: Move
Enter: Select
F5: Previous Values
Reset Case Open Status
Keeps or clears the record of previous chassis intrusion status. Enabled clears the record of
previous chassis intrusion status and the Case Opened field will show "No" at next boot. (Default:
Disabled)
Case Opened
Displays the detection status of the chassis intrusion detection device attached to the motherboard
CI header. If the system chassis cover is removed, this field will show "Yes", otherwise it will
show "No". To clear the chassis intrusion status record, set Reset Case Open Status to Enabled,
save the settings to CMOS, and then restart your system.
Current Voltage(V) Vcore/DDRII 1.8V/DDR 2.6V/+3.3V/+12V
Displays the current system voltages.
Current System/CPU Temperature
Displays current system/CPU temperature.
Current SYS/CPU FAN Speed (RPM)
Displays current system/CPU fan speed.
System/CPU Warning Temp.
Sets the warning threshold for system/CPU temperature. When system/CPU temperature ex-
ceeds the threshold, BIOS will emit warning sound. Options are: Disabled (default), 60
70
C/158
F, 80
C/176
o
o
o
SYS/CPU FAN Fail Warning
Allows the system to emit warning sound if the system/CPU fan is not connected or fails. Check
the fan condition or fan connection when this occurs. (Default: Disabled)
CPU Smart FAN Control
Enables or disables the CPU fan speed control function. Enabled allows the CPU fan to run at
different speed according to the CPU temperature. You can adjust the fan speed with EasyTune
based on system requirements. If disabled, CPU fan runs at full speed. (Default: Enabled)
GA-VM900MC Motherboard
PC Health Status
[Disabled]
Yes
OK
OK
OK
OK
46
C/114
o
47
o
C/116
0
RPM
2880 RPM
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Enabled]
+/-/PU/PD: Value
F6: Fail-Safe Defaults
F, 90
C/194
F.
o
o
o
- 42 -
Menu Level
F
o
o
F
F10: Save
ESC: Exit
F7: Optimized Defaults
Item Help
F1: General Help
C/140
F,
o
o
Advertisement
Table of Contents
