Copying the SATA RAID/AHCI driver from the motherboard driver disk to a USB flash drive
On an alternative system, copy the SATA RAID/AHCI driver to your USB flash drive from the motherboard
driver disk. For example, to install the Windows Vista 32-bit operating system
onto hard drives
(Note)
connected to the ICH10R SATA controller, copy all of the files (Figure 4) located in the
BootDrv\iMSM\32Bit directory in the motherboard driver disk to your USB flash drive.
Figure 4
(Note) To install the Windows Vista 64-bit operating system, please copy the files in the
BootDrv\iMSM\64Bit directory
GA-EX58-EXTREME Motherboard
- 98 -