Gigabyte GA-EX58-UD4 User Manual
  1. Manuals
  2. Brands
  3. Gigabyte Manuals
  4. Motherboard
  5. GA-EX58-UD4
  6. User manual
Gigabyte GA-EX58-UD4 User Manual

Gigabyte GA-EX58-UD4 User Manual

Lga1366 socket motherboard for intel coretm i7 processor family
Hide thumbs
Table of Contents

Advertisement

Quick Links

GA-EX58-UD4
LGA1366 socket motherboard for Intel
Core
i7 processor family
®
TM
User's Manual
Rev. 1002
12ME-EX58U4-1002R

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GA-EX58-UD4 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Gigabyte GA-EX58-UD4

Summary of Contents for Gigabyte GA-EX58-UD4

  • Page 1 GA-EX58-UD4 LGA1366 socket motherboard for Intel Core i7 processor family ® User's Manual Rev. 1002 12ME-EX58U4-1002R...

  • Page 3: Identifying Your Motherboard Revision

    GIGABYTE's prior written permission. Documentation Classifications In order to assist in the use of this product, GIGABYTE provides the following types of documentations:  For quick set-up of the product, read the Quick Installation Guide included with the product.

  • Page 4: Table Of Contents

    Table of Contents Box Contents ......................... 6 Optional Items......................... 6 GA-EX58-UD4 Motherboard Layout ................7 Block Diagram........................ 8 Chapter 1 Hardware Installation ..................9 Installation Precautions ..................9 Product Specifications ..................10 Installing the CPU and CPU Cooler .............. 13 1-3-1 Installing the CPU ....................
  • Page 5 Configuring SATA Hard Drive(s) ..............79 5-1-1 Configuring Intel ICH10R SATA Controllers ............79 5-1-2 Configuring GIGABYTE SATA2 SATA Controller ..........85 5-1-3 Making a SATA RAID/AHCI Driver Diskette ............. 91 5-1-4 Installing the SATA RAID/AHCI Driver and Operating System ...... 92 Configuring Audio Input and Output ...............

  • Page 6: Box Contents

    Box Contents GA-EX58-UD4 motherboard Motherboard driver disk User's Manual Quick Installation Guide One IDE cable and one floppy disk drive cable Four SATA 3Gb/s cables One SATA bracket I/O Shield • The box contents above are for reference only and the actual items shall depend on product package you obtain.

  • Page 7: Ga-Ex58-Ud4 Motherboard Layout

    GA-EX58-UD4 Motherboard Layout CPU_FAN KB_MS R_SPDIF LGA1366 ATX_12V_2X USB_1394_1 USB_1394_2 R_USB USB_LAN F_AUDIO AUDIO Intel PCIEX1_1 ® (Note) SYS_FAN1 RTL8111D PCIEX4_1 SATA2_1 CLR_CMOS GA-EX58-UD4 SATA2_0 NB_FAN PCIEX16_1 BATTERY SATA2_3 SPDIF_I SATA2_2 PCI1 CODEC SATA2_5 SATA2_4 Intel ICH10R ® PCIEX16_2 GSATA2_1...

  • Page 8: Block Diagram

    RJ45 Dual BIOS 8111D PCIe CLK (100 MHz) 6 SATA 3Gb/s Intel ® PCI Express Bus ICH10R 12 USB Ports GIGABYTE 2 SATA 3Gb/s SATA2 ATA-133/100/66/33 IDE Channel PCI Bus LPC Bus Floppy TSB43AB23 COM Port IT8720 CODEC PS/2 KB/Mouse...

  • Page 9: Chapter 1 Hardware Installation

    Chapter 1 Hardware Installation Installation Precautions The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's manual and follow these procedures: Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or •...

  • Page 10: Product Specifications

    Product Specifications Support for an Intel Core i7 series processor in the LGA 1366 package ®  (Go to GIGABYTE's website for the latest CPU support list.) L3 cache varies with CPU  4.8GT/s, 6.4GT/s  Chipset North Bridge: Intel X58 Express Chipset ®...
  • Page 11 Internal Connectors 1 x 24-pin ATX main power connector  1 x 8-pin ATX 12V power connector  1 x floppy disk drive connector  1 x IDE connector  8 x SATA 3Gb/s connectors  1 x CPU fan header ...
  • Page 12 4 GB. (Note 2) Whether the CPU/system fan speed control function is supported will depend on the CPU/ system cooler you install. (Note 3) Available functions in EasyTune may differ by motherboard model. GA-EX58-UD4 Motherboard - 1 2 -...

  • Page 13: Installing The Cpu And Cpu Cooler

    Read the following guidelines before you begin to install the CPU: • Make sure that the motherboard supports the CPU. (Go to GIGABYTE's website for the latest CPU support list.) • Always turn off the computer and unplug the power cord from the power outlet before installing the CPU to prevent hardware damage.
  • Page 14 CPU is not alignment keys) and gently insert the CPU installed.) into position. Step 5: Once the CPU is properly inserted, replace the load plate and push the CPU socket lever back into its locked position. GA-EX58-UD4 Motherboard - 1 4 -...

  • Page 15: Installing The Cpu Cooler

    1-3-2 Installing the CPU Cooler Follow the steps below to correctly install the CPU cooler on the motherboard. (The following procedure uses Intel boxed cooler as the example cooler.) ® Male Push Pin Direction of The Top of the Arrow Female Sign on the Push Pin...

  • Page 16: Installing The Memory

    • Make sure that the motherboard supports the memory. It is recommended that memory of the same capacity, brand, speed, and chips be used. (Go to GIGABYTE's website for the latest memory support list.) • Always turn off the computer and unplug the power cord from the power outlet before installing the memory to prevent hardware damage.

  • Page 17: Installing A Memory

    1-4-2 Installing a Memory Before installing a memory module , make sure to turn off the computer and unplug the power cord from the power outlet to prevent damage to the memory module. DDR3 and DDR2 DIMMs are not compatible to each other or DDR DIMMs. Be sure to install DDR3 DIMMs on this motherboard.

  • Page 18: Installing An Expansion Card

    • Removing the Card: Press the white latch at the end of the PCI Express slot to release the card and then pull the card straight up from the slot. GA-EX58-UD4 Motherboard - 1 8 -...

  • Page 19: Installing The Sata Bracket

    Installing the SATA Bracket The SATA bracket allows you to connect external SA TA device(s) to your system by expanding the internal SATA port(s) to the chassis back panel. • Turn off your system and the power switch on the power supply before installing or removing the SATA bracket and SATA power cable to prevent damage to hardware.

  • Page 20: Back Panel Connectors

    • When removing the cable, pull it straight out from the connector. Do not rock it side to side to prevent an electrical short inside the cable connector. GA-EX58-UD4 Motherboard - 2 0 -...
  • Page 21 Center/Subwoofer Speaker Out Jack (Orange) Use this audio jack to connect center/subwoofer speakers in a 5.1/7.1-channel audio configuration. Rear Speaker Out Jack (Black) Use this audio jack to connect rear speakers in a 4/5.1/7.1-channel audio configuration. Side Speaker Out Jack (Gray) Use this audio jack to connect side speakers in a 7.1-channel audio configuration.

  • Page 22: Internal Connectors

    • After installing the device and before turning on the computer, make sure the device cable has been securely attached to the connector on the motherboard. GA-EX58-UD4 Motherboard - 2 2 -...
  • Page 23 1/2) ATX_12V_2X/ATX (2x4 12V Power Connector and 2x12 Main Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, first make sure the power supply is turned off and all devices are properly installed.
  • Page 24 Overheating may result in damage to the CPU/North Bridge or the system may hang. • These fan headers are not configuration jumper blocks. Do not place a jumper cap on the headers. GA-EX58-UD4 Motherboard - 2 4 -...
  • Page 25 7) FDD (Floppy Disk Drive Connector) This connector is used to connect a floppy disk drive. The types of floppy disk drives supported are: 360 KB, 720 KB, 1.2 MB, 1.44 MB, and 2.88 MB. Before connecting a floppy disk drive, be sure to locate pin 1 of the connector and the floppy disk drive cable.
  • Page 26 The SATA connectors conform to SA TA 3Gb/s standard and are compatible with SA TA 1.5Gb/s standard. Each SATA connector supports a single SATA device. The GIGABYTE SATA2 controller supports RAID 0, RAID 1 and JBOD. Refer to Chapter 5, "Configuring SA TA Hard Drive(s)," for instructions on configuring a RAID array.

  • Page 27: Battery

    11) PWR_LED (System Power LED Header) This header can be used to connect a system power LED on the chassis to indicate system power status. The LED is on when the system is operating. The LED keeps blinking when the system is in S1 sleep state.

  • Page 28: F_Panel Front Panel Header

    LED, hard drive activity LED, speaker and etc. When connecting your chassis front panel module to this header, make sure the wire assign- ments and the pin assignments are matched correctly. GA-EX58-UD4 Motherboard - 2 8 -...

  • Page 29: Cd_In Cd In Connector, Black

    14) F_AUDIO (Front Panel Audio Header) The front panel audio header supports Intel High Definition audio (HD) and AC'97 audio. You may connect your chassis front panel audio module to this header. Make sure the wire assignments of the module connector match the pin assignments of the motherboard header. Incorrect connection between the module connector and the motherboard header will make the device unable to work or even damage it.

  • Page 30: S/Pdif In Header, Red

    HDMI display to the graphics card and have digital audio output from the HDMI display at the same time. For information about connecting the S/PDIF digital audio cable, carefully read the manual for your expansion card. Pin No. Definition SPDIFO GA-EX58-UD4 Motherboard - 3 0 -...

  • Page 31: Usb/Ieee 1394A Headers

    18) F_USB1/F_USB2 (USB Headers, Yellow) The headers conform to USB 2.0/1.1 specification. Each USB header can provide two USB ports via an optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer. Pin No. Definition Power (5V) Power (5V) USB DX- USB DY-...
  • Page 32 21) CI (Chassis Intrusion Header) This motherboard provides a chassis detection feature that detects if the chassis cover has been removed. This function requires a chassis with chassis intrusion detection design. Pin No. Definition Signal GA-EX58-UD4 Motherboard - 3 2 -...

  • Page 33: Clearing Cmos Jumper

    22) CLR_CMOS (Clearing CMOS Jumper) Use this jumper to clear the CMOS values (e.g. date information and BIOS configurations) and reset the CMOS values to factory defaults. To clear the CMOS values, place a jumper cap on the two pins to temporarily short the two pins or use a metal object like a screwdriver to touch the two pins for a few seconds.
  • Page 34 GA-EX58-UD4 Motherboard - 3 4 -...

  • Page 35: Chapter 2 Bios Setup

    To see more advanced BIOS Setup menu options, you can press <Ctrl> + <F1> in the main menu of the BIOS Setup program. To upgrade the BIOS, use either the GIGABYTE Q-Flash or @BIOS utility . Q-Flash allows the user to quickly and easily upgrade or back up BIOS without entering the •...

  • Page 36: Startup Screen

    BIOS Setup settings. You can access Boot Menu again to change the first boot device setting as needed. <End>: Q-FLASH Press the <End> key to access the Q-Flash utility directly without having to enter BIOS Setup first. GA-EX58-UD4 Motherboard - 3 6 -...

  • Page 37: The Main Menu

    The Main Menu Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use arrow keys to move among the items and press <Enter> to accept or enter a sub-menu. (Sample BIOS Version: D4) CMOS Setup Utility-Copyright (C) 1984-2008 Award Software ...
  • Page 38      Exit Without Saving Abandon all changes and the previous settings remain in effect. Pressing <Y> to the confirmation message will exit BIOS Setup. (Pressing <Esc> can also carry out this task.) GA-EX58-UD4 Motherboard - 3 8 -...

  • Page 39: Mb Intelligent Tweaker(M.i.t.)

    MB Intelligent Tweaker(M.I.T.) CMOS Setup Utility-Copyright (C) 1984-2008 Award Software MB Intelligent Tweaker(M.I.T.) (Note 1) CPU Clock Ratio [22X] Item Help CPU Frequency 2.93GHz(133x22) Menu Level  Advanced CPU Features [Press Enter] QPI Link Speed [Auto] QPI Link Speed 4.8GHz ...

  • Page 40: Cpu Frequency

    The C3/C6/C7 state is a more enhanced power-saving state than C1. (Default: Disabled) (Note) This item is pres ent only if you install a CPU that supports this feature. For more information about Intel CPUs' unique features, please visit Intel's website. GA-EX58-UD4 Motherboard - 4 0 -...
  • Page 41 CPU Thermal Monitor (Note) Enables or disables Intel CPU Thermal Monitor function, a CPU overheating protection function. When enabled, the CPU core frequency and voltage will be reduced when the CPU is overheated. (Default: Enabled) CPU EIST Function (Note) Enables or disables Enhanced Intel SpeedStep T echnology (EIST). Depending on CPU loading, Intel EIST technology can dynamically and effectively lower the CPU voltage and core frequency to decrease average power consumption and heat production.
  • Page 42 Increases CPU frequency by 17% or 19% depending on CPU loading. Warning: Before using C.I.A.2, please first verify the overclocking capability of your CPU. As stability is highly dependent on system components, when system instability occurs after overclocking, lower the overclocking ratio. GA-EX58-UD4 Motherboard - 4 2 -...
  • Page 43 >>>>> Advanced Clock Control CPU Clock Drive Allows you to adjust the amplitude of the CPU and North Bridge clock. Options are: 700mV, 800mV (default), 900mV, 1000mV. PCI Express Clock Drive Allows you to adjust the amplitude of the PCI Express and North Bridge clock. Options are: 700mV, 800mV, 900mV (default), 1000mV.
  • Page 44 F7: Optimized Defaults >>>>> Channel A/B/C Standard Timing Control CAS Latency Time Options are: Auto (default), 6~16. tRCD Options are: Auto (default), 1~15. Options are: Auto (default), 1~15. tRAS Options are: Auto (default), 1~63. GA-EX58-UD4 Motherboard - 4 4 -...
  • Page 45 >>>>> Channel A/B/C Advanced Timing Control Options are: Auto (default), 1~63. tRRD Options are: Auto (default), 1~15. tWTR Options are: Auto (default), 1~31. Options are: Auto (default), 1~31. tRFC Options are: Auto (default), 1~255. tRTP Options are: Auto (default), 1~15. tFAW Options are: Auto (default), 1~63.
  • Page 46 Options are: Auto (default), 1~2. >>>>> Channel A/B/C Writes Followed by Writes Different DIMMS Options are: Auto (default), 1~8. Different Ranks Options are: Auto (default), 1~8. On The Same Rank Options are: Auto (default), 1~2. GA-EX58-UD4 Motherboard - 4 6 -...

  • Page 47: Cpu Vcore

    ******* Advanced Voltage Control ******* CMOS Setup Utility-Copyright (C) 1984-2008 Award Software Advanced Voltage Control Voltage Types Normal Current Item Help ------------------------------------------------------------------ Menu Level >>> CPU Load-Line Calibration [Disabled] CPU Vcore 1.22500V [Auto] QPI/Vtt Voltage 1.150V [Auto] CPU PLL 1.800V [Auto] >>>...
  • Page 48 Ch-B Data VRef. The default is Auto. Ch-C Data VRef. The default is Auto. Ch-A Address VRef. The default is Auto. Ch-B Address VRef. The default is Auto. Ch-C Address VRef. The default is Auto. GA-EX58-UD4 Motherboard - 4 8 -...

  • Page 49: Standard Cmos Features

    Standard CMOS Features CMOS Setup Utility-Copyright (C) 1984-2008 Award Software Standard CMOS Features Date (mm:dd:yy) Fri, Nov 21 2008 Item Help Time (hh:mm:ss) 18:25:04 Menu Level  IDE Channel 0 Master [None]  IDE Channel 0 Slave [None]  IDE Channel 1 Master [None] ...
  • Page 50 Base Memory Also called conventional memory. Typically, 640 KB will be reserved for the MS-DOS operating system. Extended Memory The amount of extended memory. Total Memory The total amount of memory installed on the system. GA-EX58-UD4 Motherboard - 5 0 -...

  • Page 51: Advanced Bios Features

    Advanced BIOS Features CMOS Setup Utility-Copyright (C) 1984-2008 Award Software Advanced BIOS Features  Hard Disk Boot Priority [Press Enter] Item Help First Boot Device [Floppy] Menu Level Second Boot Device [Hard Disk] Third Boot Device [CDROM] Password Check [Setup] HDD S.M.A.R.T.
  • Page 52 Allows you to set a delay time for the BIOS to initialize the hard drive as the system boots up. The adjustable range is from 0 to 15 seconds. (Default: 0) Full Screen LOGO Show Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled displays normal POST message. (Default: Enabled) Init Display First Specifies the first initiation of the monitor display from the installed PCI graphics card or PCI Express graphics card.

  • Page 53: Integrated Peripherals

    Integrated Peripherals CMOS Setup Utility-Copyright (C) 1984-2008 Award Software CMOS Setup Utility-Copyright (C) 1984-2008 Award Software Integrated Peripherals Integrated Peripherals SATA RAID/AHCI Mode [Disabled] Item Help SATA RAID/AHCI Mode [Disabled] Item Help SATA Port0-3 Native Mode [Disabled] Menu Level SATA Port0-3 Native Mode [Disabled] Menu Level...

  • Page 54: Usb Mouse Function

    When No LAN Cable Is Attached... If no LAN cable is attached to the motherboard, the Status fields of all four pairs of wires will show Open and the Length fields show 0m, as shown in the figure above. GA-EX58-UD4 Motherboard - 5 4 -...
  • Page 55 (Default: Enabled) Onboard SATA/IDE Ctrl Mode (GIGABYTE SATA2 Chip) Enables or disables RAID for the SA TA controller integrated in the GIGABYTE SA TA 2 chip or configures the SATA controller to AHCI mode. Disables RAID for the SATA controller and configures the SATA controller to PATA mode.

  • Page 56: Power Management Setup

    Power On by Ring Allows the system to be awakened from an ACPI sleep state by a wake-up signal from a modem that supports wake-up function. (Default: Enabled) (Note) Supported on Windows Vista operating system only. GA-EX58-UD4 Motherboard - 5 6 -...
  • Page 57 Resume by Alarm Determines whether to power on the system at a desired time. (Default: Disabled) If enabled, set the date and time as following: Date(of Month) Alarm: Turn on the system at a specific time on each day or on a specific day in a month.

  • Page 58: Pc Health Status

    CI header. If the system chassis cover is removed, this field will show "Y es", otherwise it will show "No". To clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to CMOS, and then restart your system. GA-EX58-UD4 Motherboard - 5 8 -...
  • Page 59 Current Voltage(V) Vcore / DDR15V / +3.3V / +5V / +12V Displays the current system voltages. Current System/CPU/MCH Temperature Displays current system/CPU/North Bridge temperature. Current CPU/SYSTEM/POWER FAN Speed (RPM) Displays current CPU/system/power fan speed. CPU Warning Temperature Sets the warning threshold for CPU temperature. When CPU temperature exceeds the threshold, BIOS will emit warning sound.

  • Page 60: Load Fail-Safe Defaults

    Press <Enter> on this item and then press the <Y> key to load the optimal BIOS default settings. The BIOS defaults settings helps the system to operate in optimum state. Always load the Optimized defaults after updating the BIOS or after clearing the CMOS values. GA-EX58-UD4 Motherboard - 6 0 -...

  • Page 61: Set Supervisor/User Password

    2-11 Set Supervisor/User Password CMOS Setup Utility-Copyright (C) 1984-2008 Award Software  MB Intelligent Tweaker(M.I.T.) Load Fail-Safe Defaults  Standard CMOS Features Load Optimized Defaults  Advanced BIOS Features Set Supervisor Password  Integrated Peripherals Set User Password Enter Password: ...

  • Page 62: Save & Exit Setup

    Press <Enter> on this item and press the <Y> key. This exits the BIOS Setup without saving the changes made in BIOS Setup to the CMOS. Press <N> or <Esc> to return to the BIOS Setup Main Menu. GA-EX58-UD4 Motherboard - 6 2 -...

  • Page 63: Chapter 3 Drivers Installation

    Chapter 3 Drivers Installation • Before installing the drivers, first install the operating system. (The following instructions use Windows XP as the example operating system.) • After installing the operating system, insert the motherboard driver disk into your optical drive. The driver Autorun screen is automatically displayed which looks like that shown in the screen shot below.

  • Page 64: Application Software

    Application Software This page displays all the utilities and applications that GIGABYTE develops and some free software. You can click the Install button on the right of an item to install it. Technical Manuals This page provides GIGABYTE's application guides, content descriptions for this driver disk, and the motherboard manuals.

  • Page 65: Contact

    Contact Click the URL on this page to link to the GIGABYTE Web site. Or read the last page of th is manual to check the contact information for GIGABYTE Taiwan headquarter or worldwide branch of fices. System This page provides the basic system information.

  • Page 66: Download Center

    Download Center To update the BIOS, drivers, or applications, click the Download Center button to link to the GIGABYTE Web site. The latest version of the BIOS, drivers, or applications will be displayed. GA-EX58-UD4 Motherboard - 6 6 -...

  • Page 67: Chapter 4 Unique Features

    Chapter 4 Unique Features Xpress Recovery2 Xpress Recovery2 is a utility that allows you to quickly compress and back up your system data and perform restoration of it. Supporting NTFS, FAT32, and FAT16 file systems, Xpress Recovery2 can back up data on PATA and SATA hard drives and restore it. Before You Begin: •...
  • Page 68 Xpress Recovery2 will automatically create a new partition to store the backup image file. Step 1: Step 2: Select BACKUP to start backing up your hard When finished, go to Disk Management to drive data. check disk allocation. GA-EX58-UD4 Motherboard - 6 8 -...
  • Page 69 D. Using the Restore Function in Xpress Recovery2 Select RESTORE to restore the backup to your hard drive in case the system breaks down. The RESTORE option will not be present if no backup is created before. E. Removing the Backup Step 1: Step 2: If you wish to remove the backup file, select...

  • Page 70: Bios Update Utilities

    4-2-1 Updating the BIOS with the Q-Flash Utility A. Before You Begin: 1. From GIGABYTE's website, download the latest compressed BIOS update file that matches your motherboard model. 2. Extract the file and save the new BIOS file (e.g. EX58UD4.F1) to your floppy disk, USB flash drive, or hard drive.
  • Page 71 B. Updating the BIOS When updating the BIOS, choose the location where the BIOS file is saved. The follow procedure assumes that you save the BIOS file to a floppy disk. Step 1: 1. Insert the floppy disk containing the BIOS file into the floppy disk drive. In the main menu of Q-Flash, use the up or down arrow key to select Update BIOS from Drive and press <Enter>.
  • Page 72 Press <Y> to load BIOS defaults Step 6: Select Save & Exit Setup and then press <Y> to save settings to CMOS and exit BIOS Setup. The procedure is complete after the system restarts. GA-EX58-UD4 Motherboard - 7 2 -...

  • Page 73: Updating The Bios With The @Bios Utility

    BIOS or a system that is unable to start. 3. Do not use the G.O.M. (GIGABYTE Online Management) function when using @BIOS. 4. GIGABYTE product warranty does not cover any BIOS damage or system failure resulting from an inadequate BIOS flashing.

  • Page 74: Easytune 6

    EasyTune 6 GIGABYTE's EasyTune 6 is a simple and easy-to-use interface that allows users to fine-tune their system settings or do overclock/overvoltage in Windows environment. The user-friendly EasyTune 6 interface also includes tabbed pages for CPU and memory information, lettings users read their system- related information without the need to install additional software.

  • Page 75: Dynamic Energy Saver Advanced

    The Dynamic Energy Saver Advanced Interface A. Meter Mode In Meter Mode, GIGABYTE Dynamic Energy Saver Advanced shows how much power they have saved in a set period of time. Meter Mode - Button Information Table...
  • Page 76 Power Saver is under the enable status, and power savings meter is unable to reset to zero. (Note 5) Dynamic Energy Saver Meter will automatically reset when the total power saving reaches 99999999 Watts. GA-EX58-UD4 Motherboard - 7 6 -...

  • Page 77: Q-Share

    Q-Share, you are able to share your data with computers on the same network, making full use of Internet resources. Directions for using Q-Share After installing Q-Share from the motherboard driver disk, go to Start>All Programs>GIGABYTE> Q-Share.exe to launch the Q-Share tool. Find the Q-Share icon in your system tray and right-click on this icon to configure the data sharing settings.

  • Page 78: Time Repair

    • Each storage volume can accommodate 64 shadow copies. When this limit is reached, the oldest shadow copy will be deleted and unable to be restored. Shadow copies are read-only so you cannot edit the contents of a shadow copy. GA-EX58-UD4 Motherboard - 7 8 -...

  • Page 79: Chapter 5 Appendix

    Chapter 5 Appendix Configuring SATA Hard Drive(s) To configure SATA hard drive(s), follow the steps below: A. Install SATA hard drive(s) in your computer . B. Configure SATA controller mode in BIOS Setup. C . Configure a RAID array in RAID BIOS. (Note 1) D.
  • Page 80 The BIOS Setup menus described in this section may differ from the exact settings for your motherboard. The actual BIOS Setup menu options you will see shall depend on the motherboard you have and the BIOS version. GA-EX58-UD4 Motherboard - 80 -...

  • Page 81: Create Raid Volume

    C. Configuring a RAID array in RAID BIOS Enter the RAID BIOS setup utility to configure a RAID array. Skip this step and proceed with the installation of Windows operating system for a non-RAID configuration. Step 1: After the POST memory test begins and before the operating system boot begins, look for a message which says "Press <Ctrl-I>...
  • Page 82 Select Disks Strip Size : 128KB Capacity : 223.6 GB Create Volume [ HELP ] The following are typical values: RAID0 - 128KB RAID10 - 64KB RAID5 - 64KB []-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select Figure 5 GA-EX58-UD4 Motherboard - 82 -...
  • Page 83 Step 5: Enter the array capacity and press <Enter>. Finally press <Enter> on the Create Volume item to begin creating the RAID array. When prompted to confirm whether to create this volume, press <Y> to confirm or <N> to cancel (Figure 6). Intel(R) Matrix Storage Manager option ROM v8.0.0.1039 ICH10R wRAID5 Copyright(C) 2003-08 Intel Corporation.

  • Page 84: Delete Raid Volume

    [ HELP ] Are you sure you want to delete "Volume0"? (Y/N) : Deleting a volume will reset the disks to non-RAID. WARNING: ALL DISK DATA WILL BE DELETED. []-Select [ESC]-Previous Menu [DEL]-Delete Volume Figure 8 GA-EX58-UD4 Motherboard - 84 -...

  • Page 85: Configuring Gigabyte Sata2 Sata Controller

    Attach one end of the SATA signal cable to the rear of the SATA hard drive and the other end to available SATA port on the motherboard. On this motherboard, the GSATA2_0 and GSATA2_1 ports are supported by the GIGABYTE SATA2 SATA controller.) Then connect the power connector from your power supply to the hard drive.
  • Page 86 Figure 2 In the main screen of the GIGABYTE SATA2 RAID BIOS utility (Figure 3), use the up or down arrow key to highlight through choices in the Main Menu block. Highlight the item that you wish to execute and press <Enter>.

  • Page 87: Create A Raid Array

    In the main screen, press <Enter> on the Create RAID Disk Drive item. Then the Create New RAID screen appears (Figure 4). GIGABYTE Technology Corp. PCIE-to-SATAII/IDE RAID Controller BIOS v1.06.78 [ Create New RAID ] [ Hard Disk Drive List ]...
  • Page 88 4. Set Block Size (RAID 0 only): Under the Block item, use the up or down arrow key to select the stripe block size (Figure 6), ranging from 4 KB to 128 KB. Press <Enter>. GIGABYTE Technology Corp. PCIE-to-SATAII/IDE RAID Controller BIOS v1.06.78 [ Create New RAID ]...
  • Page 89 When finished, the new RAID array will be displayed in the RAID Disk Drive List block (Figure 8). GIGABYTE Technology Corp. PCIE-to-SATAII/IDE RAID Controller BIOS v1.06.78 [ Main Menu ] [ Hard Disk Drive List ] Create RAID Disk Drive...
  • Page 90 7. Save and Exit Setup: After configuring the RAID array, select the Save And Exit Setup item in the main screen to save your settings before exiting the RAID BIOS utility, then press <Y> (Figure 10). GIGABYTE Technology Corp. PCIE-to-SATAII/IDE RAID Controller BIOS v1.06.78 [ Main Menu ]...

  • Page 91: Making A Sata Raid/Ahci Driver Diskette

    32-bit operating system or 2) Intel Matrix Storage driver for 64bit system for Windows 64-bit. • For GIGABYTE SATA2 SATA controller, select 3) GIGABYTE GSATA driver for 32bit system for Windows 32-bit operating system or 4) GIGABYTE GSATA driver for 64bit system 64-bit.

  • Page 92: Installing The Sata Raid/Ahci Driver And Operating System

    Select the SCSI Adapter you want from the following list, or press ESC to return to the previous screen. Intel(R) ICH7R/DH SATA RAID Controller Intel(R) ICH7MDH SATA RAID Controller Intel(R) ICH8R/ICH9R/ICH10R/DO SATA RAID Controller Intel(R) ICH8M-E/ICH9M-E SATA RAID Controller ENTER=Select F3=Exit Figure 2 GA-EX58-UD4 Motherboard - 92 -...
  • Page 93 For GIGABYTE SATA2 SATA controller: Insert the floppy disk containing the SA TA RAID/AHCI driver and press <S>. Then a controller menu similar to Figure 3 below will appear. Select (Windows XP/2003) RAID/AHCI Driver for GIGABYTE GBB36X Controller and press <Enter>.
  • Page 94 For Windows Vista 64-bit, browse to the 64Bit folder. Method B: Insert the USB flash drive containing the driver files and browse to \iMSM\32Bit (for Windows Vista 32- bit) or \iMSM\64Bit (for Windows Vista 64-bit). Figure 5 GA-EX58-UD4 Motherboard - 94 -...
  • Page 95 Step 3: When a screen as shown in Figure 6 appears, select Intel(R) ICH8R/ICH9R/ICH10R/DO SATA RAID Controller and click Next. Figure 6 Step 4: After the driver is loaded, select the RAID/AHCI drive(s) where you want to install the operating system and then click Next to continue the OS installation (Figure 7).
  • Page 96 GIGABYTE SATA2 SATA controller: Step 1: Restart your system to boot from the Windows Vista setup disk and perform standard OS installation steps. When a screen similar to that below appears (RAID/AHCI hard drive(s) will not be detected at this stage), select Load Driver (Figure 8).
  • Page 97 Step 3: When a screen as shown in Figure 10 appears, select GIGABYTE GBB36X Controller and press Next. Figure 10 Step 4: After the driver is loaded, select the RAID/AHCI drive(s) where you want to install the operating system and then press Next to continue the OS installation (Figure 1 1).

  • Page 98: Rebuilding An Array

    Drive Model Serial # Size Type/Status(Vol ID) WDC WD800JD-22LS WD-WMAM9W736201 74.4GB Member Disk (0) WDC WD800JD-22LS WD-WMAM9W736333 74.4GB Member Disk (0) Volumes with "Rebuild" status will be rebuilt within the operating system. []-Select [ESC]-Exit [ENTER]-Select Menu GA-EX58-UD4 Motherboard - 98 -...
  • Page 99 Performing the Rebuild in the Operating System While in the operating system, make sure the chipset driver has been installed from the motherboard driver disk. Then launch the Intel Matrix Storage Console from All Programs in the Start menu. ® Step 1: Step 2: On the View menu of the Intel Matrix Storage...
  • Page 100 • GIGAGYTE SATA2 SATA controller: Turn off your computer and replace the failed hard drive with a new one. Use either the GIGABYTE SATA2 RAID BIOS utility or the GIGABYTE RAID CONFIGURER utility in the operating system to perform the rebuild.
  • Page 101 Rebuilding in the operating system Make sure the GIGABYTE SATA2 SATA controller driver has been installed from the motherboard driver disk. Launch the GIGABYTE RAID CONFIGURER from All Programs in the Start menu. Step 2: When the Rebuilding RAID Wizard appears, click Step 1: Next.

  • Page 102: Configuring Audio Input And Output

    4-channel audio: Front speaker out and Rear speaker out. • 5.1-channel audio: Front speaker out, Rear speaker out, and Center/Subwoofer speaker out. • 7.1-channel audio: Front speaker out, Rear speaker out, Center/Subwoofer speaker out, and Side speaker out. GA-EX58-UD4 Motherboard - 102 -...
  • Page 103 Step 2: Connect an audio device to an audio jack. The The current connected device is dialog box appears. Select the device according to the type of device you connect. Then click OK. Step 3: On the Speakers screen, click the Speaker Configu- ration tab.

  • Page 104: Configuring S/Pdif In/Out

    On the Digital Input screen, click the Default Format tab to select the default format. Click OK to complete. (Note) The actual locations of the SPDIF In and SPDIF Out connectors may differ by model. GA-EX58-UD4 Motherboard - 104 -...
  • Page 105 B. S/PDIF Out: The S/PDIF out jacks can transmit audio signals to an external decoder for decoding to get the best audio quality. 1. Conneting a S/PDIF Out Cable S/PDIF Coaxial Cable S/PDIF Optical Cable Connect a S/PDIF coaxial cable or a S/PDIF optical cable (either one) to an external decoder for transmitting the S/PDIF digital audio signals.

  • Page 106: Configuring Microphone Recording

    It is recommended that you set the volumes at a middle level. If you want to change the current sound input default device to microphone, right-click on Microphone and select Set Default Device. GA-EX58-UD4 Motherboard - 106 -...
  • Page 107 Step 4: To raise the recording and playback volume for the microphone, click the Microphone Boost icon on the right of the Recording Volume slider and set the Microphone Boost level. Step 5: After completing the settings above, click Start, point to All Programs, point to Accessories, and then click Sound Recorder to begin the sound recording.

  • Page 108: Using The Sound Recorder

    3. To stop recording audio, click the Stop Recording button Be sure to save the recorded audio file upon completion. B. Playing the Recorded Sound: You can play your recording in a digital media player program that supports your audio file format. GA-EX58-UD4 Motherboard - 108 -...

  • Page 109: Troubleshooting

    5-3-1 Frequently Asked Questions To read more F AQs for your motherboard, please go to the Support\Motherboard\F AQ page on GIGABYTE's website. Q: In the BIOS Setup program, why are some BIOS options missing? A: Some advanced options are hidden in the BIOS Setup program. Press <Delete> to enter BIOS Setup during the POST.

  • Page 110: Troubleshooting Procedure

    Turn on the power to start the computer. Press <Delete> to enter BIOS Setup. Select "Load Fail-Safe Defaults" (or "Load Optimized Defaults"). Select "Save & Exit Setup" to save changes and exit BIOS Setup. (Continued...) GA-EX58-UD4 Motherboard - 110 -...
  • Page 111 The power supply, When the computer is turned on, is the CPU cooler running? CPU or CPU socket might fail. The problem is verified and solved. The graphics card, expansion slot, or Check if there is display on your monitor. monitor might fail.

  • Page 112: Regulatory Statements

    "end of life" product. Restriction of Hazardous Substances (RoHS) Directive Statement GIGABYTE products have not intended to add and safe from hazardous substances (Cd, Pb, Hg, Cr+6, PBDE and PBB). The parts and components have been carefully selected to meet RoHS requirement.
  • Page 113 Finally, we suggest that you practice other environmentally friendly actions by understanding and using the energy-saving features of this product (where applicable), recycling the inner and outer packaging (including shipping containers) this product was delivered in, and by disposing of or recycling used batteries properly.
  • Page 114 GA-EX58-UD4 Motherboard - 114 -...
  • Page 115 - 115 - Appendix...
  • Page 116 GA-EX58-UD4 Motherboard - 116 -...
  • Page 117 - 117 - Appendix...
  • Page 118 GA-EX58-UD4 Motherboard - 118 -...
  • Page 119 TEL: +86-24-83992901 FAX: +86-24-83992909 GIGA-BYTE SINGAPORE PTE. LTD. - Singapore      WEB address : http://www.gigabyte.sg GIGABYTE TECHNOLOGY (INDIA) LIMITED - India      WEB address : http://www.gigabyte.in Thailand     ...
  • Page 120 WEB address : http://www.giga-byte.kz Czech Republic      You may go to the GIGABYTE website, select your language WEB address : http://www.gigabyte.cz in the language list on the top right corner of the website.      GIGABYTE Global Service System...

Table of Contents