LIVOLTEK GT3-30kW Quick Installation Manual page 2

Introduc on
The manual is intended for photovoltaic (PV) inverter operating personnel and qualified
electrical technicians. Any electrical installation and maintenance work on this inverter must be
carried out by qualified electricians by professional electrical personnel who has obtained the
necessary licenses from local authorities.
Before operating the inverter, please read this manual and any other related documents. Ensure
that these documents are stored carefully and are readily available at all times. The information in
this manual is subject to change without notice. For the latest information, please visit
"http://www.livoltek.com".
General Sa y
LIVOLTEK GT3-30~60kW Series Inverter is ideal for business and remote locations. It
generates renewable electricity from solar energy and provides Pure Sine Wave AC output for
connected equipment.
Please read and follow all the instructions and safty precautions on the inverter and this user
manual during installation, operation or maintenance at all times.
Personnel Safty
Personnel who plan to install or maintain Livoltek equipment must receive thorough training,
understand all necessary safety precautions, and be able to correctly perform all operations.
The qualified technician must be familiar with the safety regulations of electrical system, working
process of PV power generation system, and standards of local power grid.
The technician must read through this Quick Installation Guide carefully before any operations.
Inverter Protection
Do not disconnect the PV connectors when the inverter is running.
Ensure that there is no voltage or current before installing or disconnecting any connectors.
All safety instructions, warning labels, and nameplate on the inverter should not be removed or
covered.
When the photovoltaic array is exposed to light, it supplies a dc voltage to this equipment.
Do not touch any hot parts (such as the heat sink) during operation.
Hot surfaces – To reduce the risk of burns – Do not touch.
"Do not remove cover until 5 minutes after disconnecting all sources of supply."
As soon as receiving the inverter please check if it is damaged during its transportation. In the
event of damage, please contact your dealer immediately. Only qualified personnel can change
the country settings.
Adequate ventilation must be provided for inverter installation location.
Mount the inverter in vertical direction, and ensure that no objects block the heat dissipation.
1
EN