Frequency/Voltage Control - Gigabyte GA-8IG1000MK User Manual

Frequency/Voltage Control

CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
CPU Clock Ratio
CPU Host Clock Control
x CPU Host Frequency (Mhz)
x AGP/PCI/SRC Fixed
Memory Frequency For
Memory Frequency (Mhz)
AGP/PCI/SRC Frequency (Mhz)
: Move Enter: Select
F5: Previous Values
Incorrect using these features may cause your system broken. For power end-user use only.
CPU Clock Ratio
This setup option will automatically assign by CPU detection.
The option will display "Locked" and read only if the CPU ratio is not changeable.
CPU Host Clock Control
Disabled Disable CPU host clock control. (Default value)
Enabled Enable CPU host clock control.
CPU Host Frequency (Mhz)
This item will be available when CPU Host Clock Control is set to Enabled.
100MHz ~ 355MHz
If you use a 400Mhz FSB processor, please set CPU Host Frequency to 100Mhz.
If you use a 533Mhz FSB processor, please set CPU Host Frequency to 133Mhz.
If you use an 800Mhz FSB processor, please set CPU Host Frequency to 200Mhz.
GA-8IG1000MK(rev. 2.0) Motherboard
Frequency/Voltage Control
[15X]
[Disabled]
133
66/33/100
[Auto]
333
66/33/100
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
Set CPU Host Clock from 100Mhz to 355Mhz.
- 52 -
Item Help
Menu Level
Set CPU Ratio if CPU
Ratio is unclocked
ESC: Exit F1: General Help
F7: Optimized Defaults