Gigabyte GA-8IG1000MK User Manual page 27

7) SATA0 / SATA1 (Serial ATA Connector)
Serial ATA can provide up to 150MB/s transfer rate. Please refer to the BIOS setting for the Serial
ATA and install the proper driver in order to work properly.
8) BAT (BATTERY)
Pin No.
7 1
SATA1
7 1
SATA0
CAUTION
Danger of explosion if battery is incorrectly
replaced.
Replace only with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to the
manufacturer's instructions.
If you want to erase CMOS...
1. Turn OFF the computer and unplug the power
cord.
2. Take out the battery gently and put it aside for
about 10 minutes (Or you can use a metal
object to connect the positive and negative pins
in the battery holder to make them short for one
minute).
3. Re-install the battery.
4. Plug the power cord and turn ON the computer.
- 23 - Hardware Installation Process
Definition
1 GND
2 TXP
3 TXN
4 GND
5 RXN
6 RXP
7 GND