1. Manuals
  2. Brands
  3. Gigabyte Manuals
  4. Motherboard
  5. GA-8IG1000MT
  6. User manual

Gigabyte GA-8IG1000MT User Manual

P4 titan series motherboard
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
When you installing AGP card, please make sure the following notice
is fully understood and practiced. If your AGP card has "AGP 4X/8X
(1.5V) notch"(show below), please make sure your AGP card is AGP
4X/8X (1.5V).
Caution: AGP 2X card is not supported by Intel
850(E) /E7205 / 865(P/G/PE) / 875P. You might experience system unable
to boot up normally. Please insert an AGP 4X/8X card.
Example 1: Diamond Vipper V770 golden finger is compatible with 2X/4X
mode AGP slot. It can be switched between AGP 2X(3.3V) or 4X(1.5V)
mode by adjusting the jumper. The factory default for this card is 2X(3.3V).
The GA-8IG1000MT motherboards might not function properly, if you install
this card without switching the jumper to 4X(1.5V) mode in it.
Example 2: Some ATi Rage 128 Pro graphics cards made by "Power Color",
the graphics card manufacturer & some SiS 305 cards, their golden finger is
compatible with 2X/4X mode AGP slot, but they support 2X(3.3V) only. The
GA-8IG1000MT motherboards might not function properly, If you install this
card in it.
Note : Although Gigabyte's AG32S(G) graphics card is based on ATi Rage
128 Pro chip, the design of AG32S(G) is compliance with AGP 4X(1.5V)
specification. Therefore, AG32S(G) will work fine with Intel
(E/G) / 850(E) /E7205 / 865(P/G/PE) / 875P based motherboards.
8ig1000mt_1001_f.p65
1
AGP 4 X/8 X notc h
845(GE/PE) / 845(E/G) /
®
845(GE/PE) / 845
®
2003/4/15, 下午 03:08

Advertisement

Table of Contents
loading

Related Manuals for Gigabyte GA-8IG1000MT

Summary of Contents for Gigabyte GA-8IG1000MT

  • Page 1 GA-8IG1000MT motherboards might not function properly, If you install this card in it. Note : Although Gigabyte's AG32S(G) graphics card is based on ATi Rage 128 Pro chip, the design of AG32S(G) is compliance with AGP 4X(1.5V) specification. Therefore, AG32S(G) will work fine with Intel (E/G) / 850(E) /E7205 / 865(P/G/PE) / 875P based motherboards.
  • Page 2 The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to update the information contained herein. Third-party brands and names are the property of their respective owners. Please do not remove any labels on motherboard, this may void the warranty of this motherboard.

  • Page 3: Declaration Of Conformity

    ( description of the apparatus, sy stem, installation to w hich it refers) (reference to the specification under which conformity is declared) o EN 55011 Limits an d methods of mea surement of radio d isturbance characte ristics of industrial,sci entific an d medical (ISM high frequen cy equipment Limits an d methods of mea surement o EN 55013...
  • Page 4 DECLARATION OF CONFORMITY Per FCC Part 2 Section 2.1077(a) Responsible Party Name: hereby declares that the product Model Number: GA-8IG1000MT Conforms to the following specifications: FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a), Class B Digital Device Supplementary Information: This device complies with part 15 of the FCC Rules.
  • Page 5 GA-8IG1000MT P4 Titan Series Motherboard USER'S MANUAL Pentium 4 Processor Motherboard ® Rev. 1001 12ME-8IG1KMT-1001...

  • Page 6: Table Of Contents

    Table of Content Item Checklist ... 4 Chapter 1 Introduction ... 5 Features Summary ... 5 GA-8IG1000MT Motherboard Layout ... 7 Block Diagram ... 8 Chapter 2 Hardware Installation Process ... 11 Step 1: Install the Central Processing Unit (CPU) ... 12 Step 1-1: CPU Installation ...
  • Page 7 Frequency/Voltage Control ... 52 Load Fail-Safe Defaults ... 54 Load Optimized Defaults ... 55 Set Supervisor/User Password... 56 Save & Exit Setup ... 57 Exit Without Saving ... 58 Chapter 4 Technical Reference ... 61 @BIOS Introduction ... 61 ™ EasyTune 4 Introduction ...

  • Page 8: Item Checklist

    I/O Shield IDE cable x 1 / Floppy cable x 1 Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To protect them against damage from static electricity, you should follow some precautions whenever you work on your computer.

  • Page 9: Chapter 1 Introduction

    Chapter 1 Introduction Features Summary Form Factor — 24.4cm x 22.5cm Micro ATX size form factor, 4 layers PCB — Socket 478 for Intel — Support Intel — Support Intel — Intel Pentium ® — 2nd cache depends on CPU Chipset —...
  • Page 10 CPU, chipset and most of the peripherals. Whether your system can run under these specific bus frequencies properly will depend on your hardware configurations, including CPU, Chipsets, SDRAM, Cards… etc. GA-8IG1000MT Motherboard - 6 -...

  • Page 11: Ga-8Ig1000Mt Motherboard Layout

    GA-8IG1000MT Motherboard Layout KB_MS R_USB A TX_12V COMB ITE8712F I ntel 865G AUDIO1 81 01 L SUR_CEN CODEC GAME F_AU DIO RAM_LED CPU_FAN SOC KET 478 PCI1 PCI2 Intel IC H5 PCI3 Buzzer PWR_LE D F_U SB1 F_U SB2 INFO_LI NK...

  • Page 12: Block Diagram

    Realtek 3 PCI 8101L AC97 CODEC 8 USB PCICLK (33MHz) PCICLK (33MHz) USBCLK (48MHz) 14.318 MHz 33 MHz GA-8IG1000MT Motherboard Pentium 4 CPUCLK+/- (100/133/200MHz) Socket 478 System Bus 400/333/266MHz 800/533/400MHz DDR RAM Intel 865G MCHCLK (100/133/200MHz) 66 MHz 33 MHz 14.318 MHz...
  • Page 13 - 9 - Introduction...
  • Page 14 GA-8IG1000MT Motherboard - 10 -...

  • Page 15: Chapter 2 Hardware Installation Process

    Chapter 2 Hardware Installation Process To set up your computer, you must complete the following steps: Step 1- Install the Central Processing Unit (CPU) Step 2- Install memory modules Step 3- Install expansion cards Step 4- Connect ribbon cables, cabinet wires, and power supply Step 4 Step 4 Step 3...

  • Page 16: Step 1: Install The Central Processing Unit (Cpu)

    , and then continue pull the rod to 90-degree when a noise "cough" made. Pin1 indicator 3. CPU Top View GA-8IG1000MT Motherboard Socket Actuation Lever 2. Pull the rod to the 90-degree directly. Pin1 indicator 4.

  • Page 17: Step 1-2: Cpu Cooling Fan Installation

    Step 1-2: CPU Cooling Fan Installation Before installing the CPU cooling fan, adhere to the following warning: 1. Please use Intel approved cooling fan. 2. We recommend you to apply the thermal tape to provide better heat conduction between your CPU and cooling fan. (The CPU cooling fan might stick to the CPU due to the hardening of the thermal paste.

  • Page 18: Step 2: Install Memory Modules

    1. The DIM M socket has a notch, so the DIMM m em ory 2. Insert the DIMM mem ory module vertically into the DIMM 3. Close the plastic clip at both edges of the DIMM sockets GA-8IG1000MT Motherboard Notch module can only fit in one direction.

  • Page 19: Ddr Introduction

    PC's and value desktop SMA system s. Dual Channel DDR: GA-8IG1000MT supports Dual Channel Technology. When Dual Channel Technology is activated, the bandwidth of memory bus will be double the original one, with the fastest speed at 6.4GB/s DDR400.

  • Page 20: Step 3: Install Expansion Cards

    Informing users that system m ight not boot up normally due to AGP 2X (3.3V) is not supported by the chipset. GA-8IG1000MT Motherboard Please carefully pull out the small white-drawable bar at the end of the AGP slot when you try to install/ Uninstall the AGP card.

  • Page 21: Step 4: Connect Ribbon Cables, Cabinet Wires And Power Supply

    Step 4: Connect ribbon cables, cabinet wires and power supply Step 4-1: I/O Back Panel Introduction u PS/2 Keyboard and PS/2 Mouse Connector PS/2 Mouse Connector (6 pin Female) PS/2 Keyboard Connector (6 pin Female) v/x USB/LAN Connector USB 0 USB 2 USB 1 USB 3...
  • Page 22 MIC In (Center and Subwoofer) If you want the detail information for 2-/4-/6-channel audio setup installation, please refer to page 67. GA-8IG1000MT Motherboard This connector supports 1 standard COM port , 1 Parallel port and 1 VGA port. Device like printer can be connected to Parallel port;...

  • Page 23: Step 4-2: Connectors Introduction

    Step 4-2: Connectors Introduction 1) ATX_12V 2) ATX 3) CPU_FAN 4) SYS_FAN 5) FDD 6) IDE1 / IDE2 7) SATA0 / SATA1 8) BAT 9) F_PANEL 10) PWR_LED 11) RAM_LED 12) 2X_DET 13) F_AUDIO 14) CD_IN 15) AUX_IN 16) SUR_CEN 17) F_USB1 / F_USB2 18) COMB 19) I R...
  • Page 24 If this "ATX_12V connector" is not connected, system cannot boot. 2) ATX (ATX Power) AC power cord should only be connected to your power supply unit after ATX power cable and other related devices are firmly connected to the mainboard. GA-8IG1000MT Motherboard Pin No. Definition +12V +12V Pin No.
  • Page 25 3) CPU_FAN (CPU Fan Connector) Please note, a proper installation of the CPU cooler is essential to prevent the CPU from running under abnormal condition or damaged by overheating. The CPU fan connector supports Max. current up to 600 m A. 4) SYS_FAN (System Fan Connector) This connector allows you to link with the cooling fan on the system case to lower the system temperature.
  • Page 26 6) IDE1 / IDE2 (IDE1 / IDE2 Connector) Im portant Notice: Please connect first hard disk to IDE1 and connect CD-ROM to IDE2. The red stripe of the ribbon cable must be the sam e side with the Pin1. GA-8IG1000MT Motherboard IDE2 IDE1 - 22 -...
  • Page 27 7) SATA0 / SATA1 (Serial ATA Connector) You can connect the Serial ATA device to this connector, it provides you high speed transfer rates (150MB/sec). 8) BAT (BATTERY) Pin No. Definition SATA0 SATA1 CAUTION Danger of explosion if battery is incorrectly replaced.
  • Page 28 (Green) PW (Soft Power Connector) (Red) MSG(Message LED/ Power/ Sleep LED) (Yellow) NC (Purple) GA-8IG1000MT Motherboard Sp eaker Co nne ctor Messa ge L ED / Po we r / Soft Po we r Sl ee p LED Con nector...
  • Page 29 10) PWR_LED PWR_LED is connect with the system power indicator to indicate whether the system is on/off. It will blink when the system enters suspend mode. If you use dual color LED, power LED will turn to another color. 11) RAM_LED Do not remove memory modules while RAM _LED is on.
  • Page 30 Please note, you can have the alternative of using front audio connector or of using rear audio connector to play sound. GA-8IG1000MT Motherboard Pin No. Definition...
  • Page 31 14) CD_IN (CD In Connector) Connect CD-ROM or DVD-ROM audio out to the connector. 15) AUX_IN (AUX In Connector) Connect other device (such as PCI TV Tunner audio out) to the connector. Pin No. Definition CD-L CD-R Pin No. Definition AUX-L AUX-R - 27 -...
  • Page 32 17) F_USB1 / F_USB2 (Front USB Connector, Yellow) Be careful with the polarity of the front USB connector. Check the pin assignment while you connect the front USB cable. Please contact your nearest dealer for optional front USB cable. GA-8IG1000MT Motherboard Pin No. Definition...
  • Page 33 Make sure the pin 1 on the IR device is aling with pin one the connector. To enable the IR function on the board, you are required to purchase an option IR module. For detail inform ation please contact your autherized Gigabyte distributor. Pin No.
  • Page 34 20) GAME (Game Connector) This connector supports joystick, M IDI keyboard and other relate audio devices. 21) INFO_LINK This connector allows you to connect som e external devices to provide you extra function. GA-8IG1000MT Motherboard Pin No. Definition GRX1_R GPSA2...
  • Page 35 22) CI (CASE OPEN) This 2-pin connector allows your system to enable or disable the "Case Open" item in BIOS, if the system case begin rem ove. 23) CLR_PWD When Jumper is set to "open" and system is restarted, the password that is set will be cleared. On the contrary when Jumper is set to "close", the current status rem ains.
  • Page 36 GA-8IG1000MT Motherboard - 32 -...

  • Page 37: Chapter 3 Bios Setup

    Chapter 3 BIOS Setup BIOS Setup is an overview of the BIOS Setup Program. The program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off. ENTERING SETUP Powering ON the comput e r and pressing <Del>...

  • Page 38: The Main Menu (For Example: Bios Ver. : E13)

    Standard CMOS Features This setup page includes all the items in standard compatible BIOS. Advanced BIOS Features This setup page includes all the items of Award special enhanced features. GA-8IG1000MT Motherboard 8ig1000mt_1001_b.p65 Load F ail-Safe Defaults Load Optimized Defaults Set Superv isor Passw ord Set U ser Pass w ord Sav e &...

  • Page 39: Integrated Peripherals

    Integrated Peripherals This setup page includes all onboard peripherals. Power Manag ement Setup This setup page includes all the items of Green function features. PnP/PCI Configurations This setup page includes all the configurations of PCI & PnP ISA resources. PC Health Status This setup page is the System auto detect Temperature, voltage, fan, speed.

  • Page 40: Standard Cmos Features

    The m onth, Jan. Through Dec. The day , from 1 to 31 (or the max imum allow ed in the m onth) Year The y ear, from 1999 through 2098 GA-8IG1000MT Motherboard 8ig1000mt_1001_b.p65 Standard CMOS Features Sat, M ar 22 2003...
  • Page 41 Time The times format in < hour> <minute> <second> . The time is calculated base on the 24-hour military-time clock. For ex ample, 1 p.m. is 13: 00:00. IDE Primary Master, Slave / IDE Secondary Master, Slave The category identifies the ty pes of hard disk from driv e C to F that has been installed in the computer.

  • Page 42: Base Memory

    Extended Memory The BIOS determines how much ex tended memory is present during the POST. This is the am ount of memory located abov e 1MB in the CPU 's memory address map. GA-8IG1000MT Motherboard 8ig1000mt_1001_b.p65 - 38 - 2003/4/15, 下午 03:11...

  • Page 43: Advanced Bios Features

    Advanced BIOS Features CMOS Setup Utility -Copy right (C) 1984-2003 Aw ard Softw are First Boot Dev ice Second Boot Dev ice Third Boot Dev ice Passw ord Check # CPU Hy per-Threading On-Chip Frame Buffer Size higf: Mov e Enter:Select +/-/PU/ PD:Value F10:Sav e ESC:Ex it F 1:General Help F5:Prev ious Values F6: Fail-Safe Defaults F7:Optimized Defaults "...

  • Page 44: Password Check

    Set onboard VGA frame buffer as 16MB. (Default v alue) 32MB Set onboard VGA frame buffer as 32MB. " # " System will detect aut o matically and show up when you i n stall the Intel GA-8IG1000MT Motherboard 8ig1000mt_1001_b.p65 Pentium 4 processor with HT Technol o gy.

  • Page 45: Integrated Peripherals

    Integrated Peripherals CMOS Setup Utility -Copy right (C) 1984-2003 Aw ard Softw are On-Chip Primary PCI IDE On-Chip Secondary PCI IDE On-Chip SATA x SATA Port0 Configure as SATA Port1 Configure as USB Controller USB 2.0 Controller USB Key board Support USB M ouse Support AC97 Audio Onboard H/W LAN...

  • Page 46: Usb Controller

    SATA controller set to SATA port1. As this mode, it support by WinXP or later OS only . SATA Port1 Configure as The v alues depend on SATA Port0. USB Controller Enabled Enable USB Controller. (Default v alue) Disabled Disable USB Controller. GA-8IG1000MT Motherboard 8ig1000mt_1001_b.p65 - 42 - 2003/4/15, 下午 03:11...

  • Page 47: Usb Keyboard Support

    USB 2.0 Controller Disable this function if y ou are not using onboard U SB 2.0 feature. Enabled Enable USB 2. 0 Controller. (Default v alue) Disabled Disable USB 2. 0 Controller. USB Keyboard Support Enabled Enable USB Key board Support. Disabled Disable USB Key board Support.

  • Page 48: Onboard Serial Port 2

    Enable onboard LPT port and address is 378/IRQ7. (Default Value) 278/ IRQ5 Enable onboard LPT port and address is 278/ IRQ5. 3BC/ IRQ7 Enable onboard LPT port and address is 3BC/ IRQ7. GA-8IG1000MT Motherboard 8ig1000mt_1001_b.p65 - 44 - 2003/4/15, 下午 03:11...

  • Page 49: Parallel Port Mode

    Parallel Port Mode This feature allow s y ou to connect w ith an adv anc ed printer v ia the port mode it supports. Using Parallel port as Standard Parallel Port. (Default Value) Using Parallel port as Enhanced Parallel Port. Using Parallel port as Ex tended Capabilities Port.

  • Page 50: Power Management Setup

    In standby mode(S1): a. If use single color LED, pow er LED w ill turn off. b. If use dual color LED, pow er LED w ill turn to another c olor. GA-8IG1000MT Motherboard 8ig1000mt_1001_b.p65 Pow er Management Setup [S1(POS)]...

  • Page 51: Resume By Alarm

    Off by Power button Instant-off Press pow er button then Pow er off instantly . (Default v alue) Delay 4 Sec. Press pow er button 4 sec. to Pow er off. Enter suspend if button is pressed less than 4 sec. PME Event Wake Up Disabled Disable this function.

  • Page 52: Kb Power On Password

    When AC-pow er back to the sy stem, the sy stem alw ay s in "On" s tate. Mem ory When AC-pow er back to the sy stem, the sy stem w ill return to the Last state before AC-pow er off. GA-8IG1000MT Motherboard 8ig1000mt_1001_b.p65 - 48 - 2003/4/15, 下午 03:11...

  • Page 53: Pnp/Pci Configurations

    PnP/PCI Configurations CMOS Setup Utility -Copy right (C) 1984-2003 Aw ard Softw are PCI 1 IRQ Assignment PCI 2 IRQ Assignment PCI 3 IRQ Assignment higf: Mov e Enter:Select +/-/PU/ PD:Value F10:Sav e ESC:Ex it F 1:General Help F5:Prev ious Values F6: Fail-Safe Defaults F7:Optimized Defaults PCI 1 IRQ Assignment Auto 3,4, 5,7,9,10,11,12,14,15...

  • Page 54: Pc Health Status

    If y ou w ant to reset "C ase Opened" v alue, set "Res et Case Open Status" to "Enabled" and sav e CMOS, y our computer w ill restart. Current Voltage (V) Vcore / DDR25V / +3.3V / +5V / +12V Detec t sy stem' s v oltage status automatic ally . GA-8IG1000MT Motherboard 8ig1000mt_1001_b.p65 PC Health Status [Disabled]...

  • Page 55: Current Cpu Temperature

    Current CPU Temperature Detect CPU Temp. automatically. . Current CPU/SYSTEM FAN Speed (RPM) Detec t CPU/SYST EM Fan speed status automatic ally . CPU Warning Temperature C / 140 Monitor CPU Temp. at 60 C / 158 Monitor CPU Temp. at 70 C / 176 Monitor CPU Temp.

  • Page 56: Frequency/Voltage Control

    When time out oc cur, sy stem w ill reset and run at CPU default Host clock at nex t boot. Disabled Disable CPU Host Clock C ontrol. (Default v alue) Enabled Enable CPU Host Clock Control. GA-8IG1000MT Motherboard 8ig1000mt_1001_b.p65 Frequency /Voltage Control [15X] [Disabled]...
  • Page 57 CPU Host Frequency (Mhz) 100M Hz ~ 355MHz Incorrect using it may c ause y our sy stem broken. For pow er End-User use only ! AGP/PCI/ SRC Fixed Serial ATA dev ice is v ery sensitiv e to SRC clock. SRC ov er clock may make Serial ATA dev ice function can't w ork properly .

  • Page 58: Load Fail-Safe Defaults

    ESC: Quit F8: Q-Flash Load Fail-Safe Defaults Fail-Safe defaults contain the most appropriate values of the system parameters that allow minimum system performance. GA-8IG1000MT Motherboard 8ig1000mt_1001_b.p65 Load F ail-Safe Defaults Load Optimized Defaults Set Superv isor Passw ord Load Fail-Safe Defaults (Y/N) ?N Set U ser Pass w ord Sav e &...

  • Page 59: Load Optimized Defaults

    Load Optimized Defaults CMOS Setup Utility -Copy right (C) 1984-2003 Aw ard Softw are } Standard CMOS Features } Adv anc ed BIOS Features } Integrated Peripherals } Pow er Management Setup } PnP/PC I Configurations } PC Health Status } Frequency /Voltage Control ESC: Quit F8: Q-Flash...

  • Page 60: Set Supervisor/User Password

    Setup Menu. If you select "Set u p" at "Password Check" in Advance BIOS Features Menu, you will be prompted only when you try to enter Setup. GA-8IG1000MT Motherboard 8ig1000mt_1001_b.p65 Load F ail-Safe Defaults...

  • Page 61: Save & Exit Setup

    Save & Exit Setup CMOS Setup Utility -Copy right (C) 1984-2003 Aw ard Softw are } Standard CMOS Features } Adv anc ed BIOS Features } Integrated Peripherals } Pow er Management Setup } PnP/PC I Configurations } PC Health Status } Frequency /Voltage Control ESC: Quit F8: Q-Flash...

  • Page 62: Exit Without Saving

    } Frequency /Voltage Control ESC: Quit F8: Q-Flash Type "Y" will quit the Setup Utility without saving to RTC CMOS. Type "N" will return to Setup Utility. GA-8IG1000MT Motherboard 8ig1000mt_1001_b.p65 Load F ail-Safe Defaults Load Optimized Defaults Set Superv isor Passw ord...
  • Page 63 - 59 - BIOS Setup 8ig1000mt_1001_b.p65 2003/4/15, 下午 03:11...
  • Page 64 GA-8IG1000MT Motherboard - 60 - 8ig1000mt_1001_b.p65 2003/4/15, 下午 03:11...

  • Page 65: Chapter 4 Technical Reference

    Or you may want to keep a backup for your current BIOS, just choose "Save Current BIOS" to save it first. You make a wise choice to use Gigabyte, and @BIOS update your BIOS smartly. You are now worry free from updating wrong BIOS, and capable to maintain and manage your BIOS easily.

  • Page 66: Easytune ™ 4 Introduction

    4 has already turned the "Overclock" technology toward to a newer generation. This wonderful software is now free bundled in Gigabyte motherboard attached in driver CD. Users may make a test drive of "EasyTune 4" to find out more amazing features by themselves.

  • Page 67: Flash Bios Method Introduction

    Flash BIOS Method Introduction Method 1 : Q-Flash A. What is Q-Flash Utility? Q-Flash utility is a pre-O.S. BIOS flash utility enables users to update its BIOS within BIOS mode, no more fooling around any OS. B. How to use Q-Flash? a.
  • Page 68 [Enter] to contiune or [ESC] to abort ... ! Press Enter to Run. !! Copy BIOS Completed - Pass !! Please press any key to continue ... Congratulation! You have completed the flashed and now can restart system. GA-8IG1000MT Motherboard 8ig1000mt_1001_t.p65 1 File(s) 256K Free size: 1.14M...
  • Page 69 Method 2 : @BIOS Utility If you don't have DOS boot disk, we recommend that you used Gigabyte @BIOS BIOS. Press here. 1. Click "@BIOS" item. Click here 3.Click "P". Methods and steps: I. Update BIOS through Internet a. Click "Internet Update" icon b.
  • Page 70 Otherwise, your system won't boot. c. In method I, if the BIOS file you need cannot be found in @BIOS Gigabyte's web site for downloading and updating it according to method II. d. Please note that any interruption during updating will cause system unbooted GA-8IG1000MT Motherboard 8ig1000mt_1001_t.p65...

  • Page 71: 4- / 6-Channel Audio Function Introuction

    Revision History 2-/4-/6-Channel Audio Function Introuction The installation of windows 98SE/2K/ME/XP is very simple. Please follow next step to install the function! Stereo Speakers Connection and Settings: We recommend that you use the speaker with amplifier to acqiire the best sound effect if the stereo output is applied.
  • Page 72 Disable "Only SURROUND-KIT", and press "OK". When the "Environment settings" is "None", the sound would be performed as stereo mode (2 channels output). Please select the other settings for 4 channels output. GA-8IG1000MT Motherboard - 68 - 8ig1000mt_1001_t.p65 2003/4/15, 下午 03:12...
  • Page 73 Basic 6 Channel Analog Audio Output Mode Use the back audio panel to connect the audio out- put without any additional module. STEP 1 : Connect the front channels to "Line Out",the rear Line In channels to "Line In", and the Center/Subwoofer channels to "MIC In".
  • Page 74 Center/Subwoofer channels. It is the best solution if you need 6 channel output, Line In and MIC at the same time. "SURROUND-KIT" is included in the GIGABYTE unique "Audio Com bo Kit" as picture. STEP 1 : Insert the "SURROUND-KIT" in the back of the case ,and fix it with the screw.
  • Page 75 STEP 3 : Connect the front channels to back audio panel's "Line Out", the rear channels to SURROUND-KIT's REAR R/L, and the Center/Subwoofer channels to SURROUND-KIT's SUB CENTER. STEP 4 : Click the audio icon "Sound Effect" from the win- dows tray at the bottom of the screen.
  • Page 76 1. Connect the SPDIF output device to the rear bracket of PC, and fix it with screw. 2. Connect SPDIF device to the m otherboard. 3. Connect SPDIF to the SPDIF decoder. GA-8IG1000MT Motherboard - 72 - 8ig1000mt_1001_t.p65 2003/4/15, 下午 03:12...

  • Page 77: Jack-Sensing Introuction

    Jack-Sensing Introuction Install Microsoft DirectX8.1 before to enable Jack-Sensing support for Windows 98/98SE/2000 /M E. Jack-Sensing includes 2 parts: AUTO and M ANUAL. Following is an example for 2 channels (Windows XP): Introduction of audio connectors You may connect CDROM, Walkman or others audio input devices to Line In jack, speakers, earphone or others output devices to Line Out jack, and microphone to M IC In jack.
  • Page 78 If you set wrong with the connectors, the warning message will come out as right picture. Manual setting: If the device picture shows different from what you set, please press "Manual Selection" to set. GA-8IG1000MT Motherboard - 74 - 8ig1000mt_1001_t.p65 2003/4/15, 下午 03:12...
  • Page 79 - 75 - Technical Reference 8ig1000mt_1001_t.p65 2003/4/15, 下午 03:12...
  • Page 80 GA-8IG1000MT Motherboard - 76 - 8ig1000mt_1001_t.p65 2003/4/15, 下午 03:12...

  • Page 81: Chapter 5 Appendix

    Revision History Chapter 5 Appendix Install Drivers Pictures below are shown in Windows XP Insert the driver CD-title that came with your motherboard into your CD-ROM drive, the driver CD-title will auto start and show the installation guide. If not, please double click the CD-ROM device icon in "My computer", and execute the setup.exe.
  • Page 82 Pack. After install Windows Service Pack, it will show a question mark "?" in "Universal Serial Bus controller" under "Device Manager". Please remove the question mark and restart the system (System will auto-detect the right USB2.0 driver). GA-8IG1000MT Motherboard 8ig1000mt_1001_a.p65 Driver installation finished !

  • Page 83: Software Application

    SOFTWARE APPLICATION This page reveals the value-added software developed by Gigabyte and its worldwide partners. n Gigabyte Windows Utilities Manager (GWUM) This utility can integrate the Gigabyte's applications in the system tray n Gigabyte Management Tool (GMT) A useful tool which can manage the computer via the network...

  • Page 84: Software Information

    This page list the contects of softwares and drivers in this CD title. HARDWARE INFORMATION This page lists all device you have for this motherboard. CONTACT US Please see the last page for details. GA-8IG1000MT Motherboard - 80 - 8ig1000mt_1001_a.p65 2003/4/15, 下午 03:13...
  • Page 85 EasyTune 4 Utilities Installation Powerful utility that integrates the overclocking and hardware monitoring functions 1. Click "EasyTune4" item. 4. Right Click the icon to start "EasyTune 4". 8ig1000mt_1001_a.p65 2. Click "Next". 3. Click "Finish" to restart computer. - 81 - 2003/4/15, 下午...
  • Page 86 You also need to go through some rather different steps in the installation process. Therefore, we suggest that you refer to the installation steps in the RAID manual at our website. (Please download it at http://tw.giga-byte.com/support/user_pdf/raid_manual.pdf) GA-8IG1000MT Motherboard - 82 - 8ig1000mt_1001_a.p65...
  • Page 87 Question 8: How do I disable onboard VGA card in order to add an external VGA card? Answer: Gigabyte motherboards will auto-detect the external VGA card after it is plugged in, so you don't need to change any setting manually to disable the onboard VGA.
  • Page 88 1 long 2 short: Monitor or display card error 1 long 3 short: Keyboard error 1 long 9 short: BIOS ROM error Continuous long beeps: DRAM error Continuous short beeps: Power error GA-8IG1000MT Motherboard 8ig1000mt_1001_a.p65 - 84 - 2003/4/15, 下午 03:13...

  • Page 89: Troubleshooting

    Troubleshooting If you encounter any trouble during boot up, please follow the troubleshooting procedures. Turn off the power and unplug the AC power cable, then remove all of the add-on cards and cables from motherboard. Please make sure motherboard & chassis are not short ? Please make sure all jumper settings (such as CPU system bus speed, frequenc y ratio, voltage and etc ) are set properly.
  • Page 90 If the above procedure unable to solve your problem, please contact with your local retailer or national distributor for help. Or, you could submit your question to the service mail via Gigabyte website technical support zone (http://www.gigabyte.com.tw). The appropriate response will be provided ASAP.
  • Page 91 Technical Support/RMA Sheet Customer/Country: Contact Person: Model name/Lot Number: BIOS version: Hardware Mfs. Configuration Memory Brand Video Card Audio Card CD-ROM / DVD-ROM Modem Network AMR / CNR Keyboard Mouse Power supply Other Device Problem Description: 8ig1000mt_1001_a.p65 Company: Phone No.: E-mail Add.
  • Page 92 Extended System Configuration Data Error Checking and Correcting Electromagnetic Compatibility Enhanced Parallel Port Electrostatic Discharge Floppy Disk Device Front Side Bus Hard Disk Device Integrated Dual Channel Enhanced Interrupt Request GA-8IG1000MT Motherboard 8ig1000mt_1001_a.p65 to be continued... - 88 - 2003/4/15, 下午 03:13...
  • Page 93 Acronyms Meaning IOAPIC Input Output Advanced Programmable Input Controller Industry Standard Architecture Local Area Network Input / Output Logical Block Addressing Light Emitting Diode Megahertz MIDI Musical Instrument Digital Interface Memory Translator Hub Memory Protocol Translator Network Interface Card Operating System Original Equipment Manufacturer PCI A.G.P.
  • Page 94 GA-8IG1000MT Motherboard - 90 - 8ig1000mt_1001_a.p65 2003/4/15, 下午 03:13...
  • Page 95 - 91 - Appendix 8ig1000mt_1001_a.p65 2003/4/15, 下午 03:13...
  • Page 96 CONTACT US Contact us via the information in this page all over the world. — Taiwan Gigabyte Technology Co., Ltd. Addre ss: No.6, Bau Chiang Road, Hsin-Tien, Taipei Hsien, Taiwan, R.O.C. TEL: 886 (2) 8912-4888 (50 lines) FAX: 886 (2) 8912-4004 E-mail:english@gigabyte.com.tw...

Table of Contents