F_Panel (Front Panel Jumper) - Gigabyte GA-8I955X Pro User Manual

9) SATAII0/1/2/3 (SATA 3Gb/s Connectors, Controlled by ICH7R)
10) ESATAII0/1 (SATA 3Gb/s Connectors, Controlled by Sil3132)
SATA 3Gb/s can provide up to 300MB/s transfer rate. Please refer to the BIOS setting for the SATA
3Gb/s and install the proper driver in order to work properly.

11) F_PANEL (Front Panel Jumper)

Please connect the power LED, PC speaker, reset switch and power switch etc of your chassis front
panel to the F_PANEL connector according to the pin assignment below.
HD (IDE Hard Disk Active LED) (Blue)
SPEAK (Speaker Connector) (Amber)
RES (Reset Switch) (Green)
PW (Power Switch) (Red)
MSG(Message LED/Power/Sleep LED)
(Yellow)
NC ( Purple)
Pin No.
7 1
1 7
SATAII
(controlled by ICH7R)
1
7
ESATAII
(controlled by Sil3132)
Only for GA-8I955X Royal.
SPEAK-
Speaker Connector
SPEAK+
PW-
Power Switch
PW+
MSG-
Message LED/
MSG+
Power/
Sleep LED
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
Pin 1: Power
Pin 2- Pin 3: NC
Pin 4: Data(-)
Open: Normal
Close: Reset Hardware System
Open: Normal
Close: Power On/Off
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
NC
- 23 -
Definition
1 GND
2 TXP
3 TXN
4 GND
5 RXN
6 RXP
7 GND
19
20
NC
RES+
Reset Switch
RES-
HD-
IDE Hard Disk
HD+
Active LED
2 1
Hardware Installation