Integrated Peripherals - Gigabyte GA-8I955X Pro User Manual

2-3

Integrated Peripherals

CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
On-Chip Primary PCI IDE
On-Chip Secondary PCI IDE
SATA RAID/AHCI Mode
x On-Chip SATA Mode
x PATA IDE Set to
SATA Port 0/2 Set to
SATA Port 1/3 Set to
USB Controller
USB 2.0 Controller
USB Keyboard Support
USB Mouse Support
Azalia Codec
Onboard H/W 1394
Onboard H/W SATA1
H/W SATA Function1
Onboard H/W GigaRAID
GigaRAID Function
Onboard H/W LAN1
Onboard H/W LAN21
: Move Enter: Select
F3: Language
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
Onboard LAN1 Boot ROM
Onboard LAN2 Boot ROM1
Onboard Serial Port 1
i-Lock
Onboard Parallel Port
Parallel Port Mode
x ECP Mode Use DMA
: Move Enter: Select
F3: Language
On-Chip Primary PCI IDE
Enabled Enable onboard 1st channel IDE port. (Default value)
Disabled Disable onboard 1st channel IDE port.
On-Chip Secondary PCI IDE
Enabled Enable onboard 2nd channel IDE port. (Default value)
Disabled Disable onboard 2nd channel IDE port.
SATA RAID / AHCI Mode
RAID Set the onboard SATA controller to RAID mode. (Default value)
AHCI Set the onboard SATA controller to AHCI mode. Advanced Host Controller Inter-
face (AHCI) is an interface specification that allows the storage driver to enable
advanced Serial ATA features such as Native Command Queuing and hot plug.
For more details about AHCI, please visit Intel's website.
Disabled Set the onboard SATA controller to IDE mode.
Only for GA-8I955X Royal.
GA-8I955X Royal/GA-8I955X Pro Motherboard - 36 -
Integrated Peripherals
[Enabled]
[Enabled]
[RAID]
Auto
Ch.1 Master/Slave
Ch.2 Master/Slave
Ch.3 Master/Slave
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Auto]
[Enabled]
[Enabled]
[RAID]
[Enabled]
[RAID]
[Enabled]
[Enabled]
+/-/PU/PD: Value
F5: Previous Values F6: Fail-Safe Defaults
Integrated Peripherals
[Disabled]
[Disabled]
[3F8/IRQ4]
[Enabled]
[378/IRQ7]
[SPP]
3
+/-/PU/PD: Value
F5: Previous Values F6: Fail-Safe Defaults
Item Help
Menu Level
If a hard disk
controller card is
used, set at Disabled.
[Enabled]
Enable on-chip IDE
Port.
[Disabled]
Disable on-chip IDE
Port.
F10: Save ESC: Exit
F7: Optimized Defaults
Item Help
Menu Level
F10: Save ESC: Exit
F7: Optimized Defaults
F1: General Help
F1: General Help