F_Panel (Front Panel Jumper) - Gigabyte GA-M51GM-S2G User Manual

8)

F_PANEL (Front Panel Jumper)

Please connect the power LED, PC speaker, reset switch and power switch etc of your chassis front
panel to the F_PANEL connector according to the pin assignment below.
HD (IDE Hard Disk Active LED)
SPEAK (Speaker Connector)
RES (Reset Switch)
PW (Power Switch)
MSG(Message LED/Power/Sleep LED)
NC
9) CD_IN (CD In Connector)
Connect CD-ROM or DVD-ROM audio out to the connector.
GA-M51GM-S2G Motherboard
Message LED/
Power/
Sleep LED
2
1
Reset Switch
IDE Hard Disk Active LED
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
Pin 1: Power
Pin 2- Pin 3: NC
Pin 4: Data(-)
Open: Normal
Close: Reset Hardware System
Open: Normal
Close: Power On/Off
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
NC
1
Pin No.
1
2
3
4
- 22 -
Speaker Connector
Power
Switch
20
19
Definition
CD-L
GND
GND
CD-R