F_Panel (Front Panel Jumper) - Gigabyte GA-K8NE-RH User Manual

8)

F_PANEL (Front Panel Jumper)

Please connect the power LED, PC speaker, reset switch and power switch etc of your chassis front
panel to the F_PANEL connector according to the pin assignment below.
HD (IDE Hard Disk Active LED) (Blue)
SPEAK (Speaker Connector) (Amber)
RES (Reset Switch) (Green)
PW (Power Switch) (Red)
MSG(Message LED/Power/Sleep LED)
(Yellow)
NC ( Purple)
Message LED/
Power
Power/
Switch
Sleep LED
2
1
Reset Switch
IDE Hard Disk Active LED
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
Pin 1: Power
Pin 2- Pin 3: NC
Pin 4: Data(-)
Open: Normal
Close: Reset Hardware System
Open: Normal
Close: Power On/Off
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
NC
- 21 -
Speaker Connector
20
19
Hardware Installation