Step 2: Install Memory Modules - Gigabyte GA-7VKMLS User Manual

Amd socket a processor motherboard

Hide thumbs Also See for GA-7VKMLS:

Table of Contents

Step 2: Install memory modules

The motherboard has 2 dual in-line memory module (DIMM) sockets support 6 banks. The BIOS will

automatically detects memory type and size. To install the memory module, just push it vertically into the

DIMM socket.The DIMM module can only fit in one direction due to the two notch. Memory size can

vary between sockets.

1. The DIMM slot has two notch, so the

DIMM memory module can only fit in

one direction.

3. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.

Reverse the installation steps when you wish to remove the DIMM module.

When STR/DIMM LED is ON, do not install/remove SDRAM from socket.

Please note that the DIMM module can only fit in one direction due to

the two notches. Wrong orientation will cause improper installation.

Please change the insert orientation.

GA-7VKMLS Motherboard

SDRAM

2. Insert the DIMM memory module

vertically into the DIMM slot. Then

push it down.

- 12 -

Table of Contents