Table of Contents
Advertisement
Power Management Setup
AMIBIOS SETUP - POWER MANAGEMENT SETUP
( C ) 2001 American Megatrends, Inc. All Rights Reserved
ACPI Standby State
Power LED in S1 state
USB Dev Wakeup From S3
Suspend Time Out (Min.)
IRQ3
IRQ 4
IRQ 5
IRQ 7
IRQ 9
IRQ 10
IRQ 11
IRQ 13
IRQ 14
IRQ 15
Soft-off by Power Button
AC Back Function
Modem Ring / Wake On Lan
PME Event Wake Up
Keyboard Wakeup From
PS/2 Mouse Wakeup From
ACPI Standby State
S1/POS
S3/STR
Power LED in S1 state
Blinking
Dual/OFF
GA-7VKMLS Motherboard
:S1/POS
:Blinking
:Disabled
:Disabled
:Monitor
:Monitor
:Ignore
:Monitor
:Ignore
:Ignore
:Ignore
:Ignore
:Monitor
:Ignore
:Instant off
:Soft-Off
:Enabled
:Enabled
:S1(Suspend)
:S1(Suspend)
Figure 5: Power Management Setup
Set ACPI standby state is S1. (Default Value)
Set ACPI standby state is S3.
In standby mode(S1), power LED will blink. (Default Value)
In standby mode(S1):
a. If use single color LED, power LED will turn off.
b. If use dual color LED, power LED will turn to another color.
- 36 -
Resume On RTC Alarm
RTC Alarm Date
RTC Alarm Hour
RTC Alarm Minute
RTC Alarm Second
ESC: Quit
F1 : Help
F5 : Old Values
F6 : Fail-Safe
F8 : Q-Flash Utility
:Disabled
:15
:12
:30
:30
: Select Item
PU/PD+/-/ : Modify
(Shift)F2: Color
F7:Optimized
Advertisement
Table of Contents
