Table of Contents
Advertisement
4) FDD (Floppy Connector)
1
5) IDE1/IDE2 [IDE1 (Primary), IDE2(Secondary) Connector]
1
6 ) PWR_LED
1
GA-7VKMLS Motherboard
Please connect the floppy driver ribbon cables
to FDD. It supports 360K,1.2M,720K,1.44M
and 2.88M bytes floppy disk types.
The rad stripe of the ribbn cable must be the
same side with the Pin1.
1
- 18 -
Important Notice:
Please connect first harddisk to IDE1 and
connect CDROM to IDE2.
The rad stripe of the ribbn cable must be the
same side with the Pin1.
PWR_LED is connect with the system power
indicator to indicate whether the system is
on/off. It will blink when the system enters
suspend mode. If you use dual color LED,
power LED will turn to another color.
Advertisement
Table of Contents
