Reassigning Component Buttons; Changing Volume Lock - Gateway 46-inch User Manual

Remote Control User's Guide

Reassigning component buttons

You can reassign the component buttons on the remote control if you have
more than one of the same type of component.
Example:
If you are using the remote to control the cable (CBL), CD, DVD, TV, and two
VCRs, you can reassign the satellite (SAT) button as a second VCR button.
To reassign component buttons:
1
Press and hold
2
Press
3
Press the component button that you want (
component button that you are reassigning (
is now reassigned and can be programmed as a VCR component button.
See "Programming the remote control" on page 7.

Changing volume lock

The remote control can be set to control volume through your TV while in cable
(CBL), DVD, satellite (SAT), and VCR component modes. Use the volume lock
if you want to control the volume for all components through a specific
component.
Example:
You want to control volume for all components through the receiver (AUX).
To reassign component buttons:
1
Press and hold
2
Press
3
Press the component button that you want (
twice. Volume will now be controlled through the receiver for all
components.
20
until the LED flashes twice.
SETUP
. The LED flashes twice.
9 9 2
until the LED flashes twice.
SETUP
. The LED flashes twice.
9 9 3
www.gateway.com
) once, then press the
VCR
) once. The SAT button
SAT
) once. The LED flashes
AUX