Remote Control Buttons - Gateway 46-inch User Manual

Remote Control User's Guide

Remote control buttons

Button
2
Function
SETUP. Starts all programming sequences.
Remote LED. Blinks when the remote is being
programmed or is sending a signal to your
plasma TV.
POWER. Turns the selected component on and
off.
Programs the remote control to recognize a
component. For programming instructions, see
"Programming the remote control" on page 7.
TV. Selects a programmed TV.
DVD. Selects a programmed DVD player.
VCR. Selects a programmed VCR.
CBL. Selects a programmed cable TV set-top
box.
SAT. Selects a programmed satellite TV set-top
box.
AMP. Selects a programmed amplifier.
CD. Selects a programmed CD player.
AUX. Selects a programmed component.
www.gateway.com