Reassigning Component Buttons; Changing Volume Lock - Gateway 30-inch User Manual

Reassigning component buttons

You can reassign the component buttons on the remote control if you have more than
one of the same type of component.
Example:
If you are using the remote to control a DVD, TV, and two VCRs, you can reassign the
CD button as a second VCR button.
To reassign component buttons:
1
Press and hold the
2
Press
9 9 2
3
Press the component button that you want (for example:
component button that you are reassigning (for example:
is now reassigned and can be programmed as a VCR component button. See
"Programming the remote control" on page

Changing volume lock

The remote control is set to control volume through your LCD TV while in cable (CBL),
DVD, satellite (SAT), and VCR component modes. Use the volume lock if you want to
control the volume for all components through a specific component.
Example:
You want to control volume for all components through the television.
To set the volume lock to the TV:
1
Press and hold the
2
Press
9 9 3
3
Press the component button that you want (for example:
twice. Volume will now be controlled through the television for all components.
button until the LED flashes twice.
SETUP
. The LED flashes twice.
button until the LED flashes twice.
SETUP
. The LED flashes twice.
www.gateway.com
) once, then press the
VCR
) once. The CD button
CD
7.
) once. The LED flashes
TV
9