LCD TV. POWER. Turns the selected component on and off. Programs the remote control to recognize a component. For programming instructions, see “Programming the remote control” on page 8. TV. Selects a programmed TV. Pre-programmed for your 30-inch LCD TV.
Page 7
Remote control buttons Button Function Number button pad. Selects a channel or enters a password. MUTE. Turns the sound on and off. 100. Works as an ENTER button in other video modes. PQRS WXYZ SPACE ENTER VOL. Turns volume up or down.
Page 8
Remote Control User’s Guide Button Function WIDE. Cycles through standard and widescreen viewing modes. - OR - WIDE GUIDE EXIT GUIDE. Does not work in TV mode. Accesses programming guides, such as the one that comes with a satellite dish.
Page 9
Button Function POSITION/Reverse. Moves the PIP window. Rewinds the CD, DVD, or VCR when the component is activated with the remote control. PIP/Play. Turns PIP (picture-in-picture) mode, POP (picture-on-picture) mode, and PBP (picture by picture) mode on and off. POSITION...
Page 10
Remote Control User’s Guide Button Function ZOOM. Turns ZOOM mode on and off. 02. No programmed function. 03. No programmed function. 04. No programmed function. ZOOM S-VIDEO. Selects the component connected to VIDEO2 (S-VIDEO) as the input source. S-VIDEO AUDIO RGB.
Inserting batteries Inserting batteries To install batteries: ■ Insert two AA batteries into the remote control. Make sure that you match on the batteries with the symbols inside the battery – – compartment. www.gateway.com...
Programming the remote control The TV component button has been preset to work with your Gateway LCD TV (program code 0080). You can program the remote control to work with as may as seven other components. To program the remote to control other components: Turn on the component.
Programming the remote control Component program codes Use the codes in the following tables to program the remote control to work with your audio and video components. Amplifier and tuner codes Manufacturer Program Code Manufacturer Program Code Bose 0674 Polk Audio...
Page 14
Remote Control User’s Guide CD player codes Manufacturer Program Code(s) Manufacturer Program Code(s) Aiwa 0157 Parasound 0420 Burmester 0420 Philips 0157, 0626 California Audio Labs 0029 Pioneer 0032, 0468, 0305, 1062, 1063 Carver 0157, 0179 Polk Audio 0157 0000 Proton...
Programming the remote control Manufacturer Program Code(s) Manufacturer Program Code(s) Onkyo 0101, 0868 Victor 0072 Optimus 0032, 0468, 0420, 0179, Wards 0053, 0157 0305, 1063, 0000, 0037, 0145 Panasonic 0029 Yamaha 0036, 0888 DVD player codes Manufacturer Program Code(s) Manufacturer...
Page 16
Remote Control User’s Guide Computer and Home automation codes Manufacturer Program Code Manufacturer Program Code Gateway 1272 Security System 0167 0240 Universal X10 0167 One For All 0167 0167 Radio Shack 0240 Receiver codes Manufacturer Program Code(s) Manufacturer Program Code(s)
Page 17
Programming the remote control Satellite set-top box codes Manufacturer Program Code(s) Manufacturer Program Code(s) AlphaStar 0772 Next Level 0869 Chaparral 0216 Panasonic 0247, 0701 Echostar 0775, 1005 Philips 1076, 1142, 0722, 0724, 0749 Expressvu 0775 Proscan 0392 0566 0566, 0392, 0143, 0855...
Page 18
Remote Control User’s Guide Manufacturer Program Code(s) Manufacturer Program Code(s) Audiovox 0092, 0180, 0451, 0623 Nikko 0178, 0030, 0092 Baysonic 0180 Onwa 0180 Belcor 0019 Optimus 0250, 0166, 0154 Bell & Howell 0016, 0154 Optonica 0093 Bradford 0180 Orion 0463, 0179, 0236...
Searching for component codes If you cannot find your manufacturer in the component list or the program code does not work, you can use the remote control to search for the correct component code. To search for a component code: Turn on the component.
“Programming the remote control” on page 8. Changing volume lock The remote control can be set to control volume through your TV while in cable (CBL), DVD, CD, and VCR component modes. Use the volume lock if you want to control the volume for all components through a specific component.
Your DVD player remote control has a scan function that you may use frequently. There is not a scan button on the remote control. You can assign a button and use the DVD remote to teach the remote control the scan function. Important Make sure that you have already programmed the remote control for the component.
LCD TV for more information about the OSD. To access the OSD with the remote control: Press the component button. Press the button on the remote control to open the OSD. MENU Press the buttons to select the menu you want. Press the button to open the menu.
Remote Control User’s Guide Setting the sleep timer Set the sleep timer using the remote control. The sleep timer lets you set a time delay to turn off your LCD TV automatically. To set the sleep timer using the remote control: Press the component button.
MPAA ■ Age Block ■ Content Block To set the parental controls using MPAA: Press the button on the remote control to open the OSD. MENU Press the buttons to select the menu, then CAPTION & OPTION press to open the menu.
Remote Control User’s Guide Press the buttons to select the sub-menu, then press PARENTAL button to open the sub-menu. CAPTION & OPTION MPAA UNBLOCKED AGE BLOCK CONTENT BLOCK SET CODE LOCK ON/OFF Use the number pad to enter your password when prompted. If you have not set a password, enter 0000.
Page 31
Changing OSD options To set the parental controls using AGE BLOCK: Press the button on the remote control to open the OSD. MENU Press the buttons to select the menu, then CAPTION & OPTION press to open the menu. CAPTION & OPTION...
Page 32
Remote Control User’s Guide Use the number pad to enter your password when prompted. If you have not set a password, enter 0000. For more information about setting a password, see “Setting a password” on page 31. Enter Code * * * *...
Page 33
Changing OSD options To set the parental controls using CONTENT BLOCK: Press the button on the remote control to open the OSD. MENU Press the buttons to select the menu, then CONTENT & OPTION press to open the menu. CAPTION & OPTION...
Page 34
Remote Control User’s Guide Use the number pad to enter your password when prompted. If you have not set a password, enter 0000. For more information about setting a password, see “Setting a password” on page 31. Enter Code * * * *...
You control access to the parental controls with a password. The default password is 0000. You can change the password to any four-digit number. Press the button on the remote control to open the OSD. MENU Press the buttons to select the menu, then CAPTION &...
Page 36
Remote Control User’s Guide Use the number pad to enter your password when prompted. If you have not set a password, enter 0000. If you have forgotten your password, enter 0905. Enter Code * * * * Press the buttons to select the...
Make sure that the remote was programmed for that component. See “Programming the remote control” on page 8. The remote control will not accept the component program code. ■ Make sure that you followed all the steps in the programming procedure.
Page 38
Remote Control User’s Guide www.gateway.com...