Gateway Solo 5350 User Manual page 155

6
Hold the new or replacement module at a 30-degree angle and press it
into the empty memory slot. This module is keyed so that it can only
be inserted in one direction. If the module does not fit, make sure the
notch in the module lines up with the tab in the memory bay.
Important Use only PC133 (133 MHz) memory modules.
7
Gently push the module down until it clicks in place.
8
Replace the memory bay cover and cover screws, insert the battery,
connect the AC adapter, and turn on your notebook.
www.gateway.com
Installing memory
149