NETGEAR FVX538 - ProSafe VPN Firewall 200 Router Reference Manual page 87

– LAN IP address subnet is 192.168.1.1 255.255.255.0
– DMZ IP address subnet is 192.168.10.1 255.255.255.0
• Web server PC on the firewall's LAN
– LAN IP address is 192.168.1.2
– Access to Web server is (simulated) public IP address 10.1.0.52
IP Address Requirements—If you arrange with your ISP to have more than one public IP address
for your use, you can use the additional public IP addresses to map to servers on your LAN or
DMZ. One of these public IP addresses will be used as the primary IP address of the router. This
address will be used to provide Internet access to your LAN PCs through NAT. The other
addresses are available to map to your servers.
To configure the FVX538 for additional IP addresses:
Go to the Rules menu.
1.
If your server is to be on your LAN, select "LAN-WAN".
2.
If your server is to be on your DMZ, select "DMZ-WAN".
Click the Add button to create an Inbound Services rule.
3.
In the Add/Edit menu (see
4.
Firewall Protection and Content Filtering
Reference Manual for the ProSafe VPN Firewall 200 FVX538
Figure 6-5), select the HTTP service for a web server.
January 2005
6-9