Bandwidth Limiting - NETGEAR FVS338 - ProSafe VPN Firewall 50 Router Reference Manual

FVS338 ProSafe VPN Firewall 50 Reference Manual
b. Enter the End Port range (1 - 65534).
6. Click Add. The Port Triggering Rule will be added to the Port Triggering Rules table.
To edit or modify a rule:
1. Click Edit in the Action column opposite the rule you wish to edit. The Edit Port Triggering
Rule screen will display.
2. Modify any of the fields for this rule.
3. Click Reset to cancel any changes and return to the previous settings.
4. Click Apply to save your modifications. Your changes will appear in the Port Triggering
Rules table.
To check the status of the Port Triggering rules, click the Status link on the Port Triggering
screen..
Figure 4-19

Bandwidth Limiting

Bandwidth limiting determines the way in which the data is communicated with your host. The
purpose of bandwidth limiting is to provide a solution for limiting the traffic, thus preventing the
LAN users from consuming all the bandwidth on your WAN link.
Bandwidth limiting does not apply to the DMZ interface.
4-28 Firewall Protection and Content Filtering
v1.0, March 2009