Enabling The Traffic Meter - NETGEAR FVS338 - ProSafe VPN Firewall 50 Router Reference Manual

Enabling the Traffic Meter

To monitor traffic limits on each of the WAN ports, select Administration from the main menu
and Traffic Meter from the submenu. The Broadband Traffic Meter screen will display. (The
Broadband and Dialup ports are programmed separately.) A WAN port shuts down once its traffic
limit is reached if the Block all traffic feature is enabled.
The Traffic Meter screen also provides the following information:
• Internet Traffic Statistics – Displays statistics on Internet Traffic via the WAN port. If you
have not enabled the Traffic Meter, these statistics are not available.
Figure 6-7
• Traffic by Protocol – Click this button to display Internet Traffic details. The volume of
traffic for each protocol will be displayed in a sub-window. Traffic counters are updated in
MBytes scale and the counter starts only when traffic passed is at least 1 MB
Router and Network Management
FVS338 ProSafe VPN Firewall 50 Reference Manual
v1.0, March 2009
Each WAN port
is programmed
separately.
WAN port shuts
down once traffic
limit reached. An
e-mail can be
sent.
Traffic Counter
settings
Internet Traffic
Statistics
6-19