NETGEAR FVS338 - ProSafe VPN Firewall 50 Router Reference Manual page 161

Vpn firewall
Hide thumbs Also See for FVS338 - ProSafe VPN Firewall 50 Router:
Table of Contents

Advertisement

Make sure your PC's IP address is on the same subnet as the firewall. If you are using the
recommended addressing scheme, your PC's address should be in the range of 192.168.0.2 to
192.168.0.254.
Note: If your PC's IP address is shown as 169.254.x.x: Recent versions of Windows
and MacOS will generate and assign an IP address if the computer cannot
reach a DHCP server. These auto-generated addresses are in the range of
169.254.x.x. If your IP address is in this range, check the connection from the
PC to the firewall and reboot your PC.
If your firewall's IP address has been changed and you don't know the current IP address,
clear the firewall's configuration to factory defaults. This will set the firewall's IP address to
192.168.1.1. This procedure is explained in
Password" on page
Tip: If you don't want to revert to the factory default settings and lose your
configuration settings, you can reboot the router and use sniffer to capture
packets sent during the reboot. Look at the ARP packets to locate the router's
LAN interface address.
Make sure your browser has Java, JavaScript, or ActiveX enabled. If you are using Internet
Explorer, click Refresh to be sure the Java applet is loaded.
Try quitting the browser and launching it again.
Make sure you are using the correct login information. The factory default login name is
admin and the password is password. Make sure that CAPS LOCK is off when entering this
information.
If the firewall does not save changes you have made in the Web Configuration Interface, check the
following:
When entering configuration settings, be sure to click the APPLY button before moving to
another menu or tab, or your changes are lost.
Click the Refresh or Reload button in the Web browser. The changes may have occurred, but
the Web browser may be caching the old configuration.
Troubleshooting
FVS338 ProSafe VPN Firewall 50 Reference Manual
7-7.
v1.0, March 2009
"Restoring the Default Configuration and
7-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Prosafe vpn firewall 50 fvs338 fvs338 fvs338

Table of Contents