NETGEAR FVS338 - ProSafe VPN Firewall 50 Router Reference Manual page 53

Figure 3-5
To enable RIP:
1. Select Network Configuration from the main menu and Routing from the submenu. The
Routing screen will display.
2. Click the RIP Configuration link. The RIP Configuration screen will display.
3. From the RIP Direction pull-down menu, select the direction for the router to send and
receive RIP packets:
• Both – the router broadcasts its routing table and also processes RIP information received
from other routers.
• Out Only – the router broadcasts its routing table periodically but does not accept RIP
information from other routers.
• In Only – the router accepts RIP information from other routers, but does not broadcast its
routing table.
LAN Configuration
FVS338 ProSafe VPN Firewall 50 Reference Manual
v1.0, March 2009
3-13