NEC MultiSync M431 Setup Manual page 9

Regularly dust off the power cord by using a soft dry cloth.
REQUIRED
Before moving the product, make sure the product power is off, then
unplug the power cord from the power outlet and check that all cables
connecting the product to other devices are disconnected.
REQUIRED
Do not use the power cord with a power tap.
Adding an extension cord may lead to fire as a result of overheating.
PROHIBITED
Do not bind the power cord and the USB cable.
It may trap heat and cause a fire.
PROHIBITED
Do not connect to a LAN with excessive voltage.
When using a LAN cable, do not connect to a peripheral device with
wiring that might have excessive voltage. Excessive voltage on the LAN
PROHIBITED
port may cause an electric shock.
Do not climb on the table where the product is installed. Do not install
the product on a wheeled table if the wheels on the table have not been
properly locked. The product may fall, causing damage to the product or
PROHIBITED
personal injury.
Installation, removal, and height adjustment of the optional table top stand.
• When installing the table top stand, handle the unit with care to avoid
pinching your fingers.
• Installing the product at the wrong height can cause tipping.
REQUIRED Please install your product at proper height to prevent personal injury or
damage to the product.
Do not push or climb on the product. Do not grab or hang onto the
product. Do not rub or tap the product with hard objects. The product may
fall, causing damage to the product or personal injury.
PROHIBITED
Do not hit or strike the screen.
Do not push against the screen with a pointed object.
It can cause serious damage to the product or personal injury.
PROHIBITED
Incorrect usage of batteries can result in leaks or bursting.
• Use the specified batteries only.
• Insert batteries matching the (+) and (–) signs on each battery to the (+)
and (–) signs of the battery compartment.
REQUIRED
• Do not mix battery brands.
CAUTION
English-7
EN