Cable Information - NEC MultiSync M431 Setup Manual

3. Connect the supplied power cord
NOTE: • Please make sure that enough power is supplied to the monitor. Please
refer to the "Power Supply" in the specification (See User's manual).
Screw
Clamp

4. Cable information

CAUTION: Use the provided specified cables with this product so as not to interfere
with radio and television reception.
For USB, please use a shielded signal cable with ferrite core.
For HDMI, RS-232C and DisplayPort, please use a shielded signal cable.
Use of other cables and adapters may cause interference with radio and
television reception.
5. Turn on the power for the monitor and the external equipment
Switch on the monitor power first.
Main Power Switch
OFF
Main Power Switch
ON
English-10
Wireless Remote Control
Power
Keys for Adjust
and setting
Change Input
OSD Menu