Table of Contents
Advertisement
Quick Links
CrossWave
ALL-IN- ONE MULTI-SURFACE CLEANER
MODELS 3999F, 4000F
QUICK START GUIDE
1. Get Ready
Assemble and charge machine (pg 5). If dry cleaning,
strainer could be removed for increased tank capacity (pg 6).
If wet cleaning, fill the clean water tank (pg 7).
2. Choose Your Cleaning Mode
Press (C) to power on. Choose mode with (B).
View selection on (D).
Power Vac Mode
Great for dry debris on
hard floors and area rugs.
3. Start Cleaning
Recline machine with your foot to start brush roll. For extra
fluid and suction, use Turbo Mode (A). For dry and wet
cleaning against walls and baseboards, use ZeroGap™ Edge
Cleaning (E), located on the right side of the foot.
CLEANING TIPS
• For best results, use on hard floors and large/heavy area rugs.
Follow manufacturer's instructions for small/lightweight rugs.
• If planning to store for over 6 months, ensure the battery is
fully charged before storage.
Scan the QR code for product video.
OmniForce
®
Power Mop Mode
Efficiently clean wet and
dry messes together.
EDGE
™
E
A
B
C
D
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Bissell CrossWave OmniForce EDGE
Summary of Contents for Bissell CrossWave OmniForce EDGE
- Page 1 CrossWave OmniForce EDGE ™ ® ALL-IN- ONE MULTI-SURFACE CLEANER MODELS 3999F, 4000F QUICK START GUIDE 1. Get Ready Assemble and charge machine (pg 5). If dry cleaning, strainer could be removed for increased tank capacity (pg 6). If wet cleaning, fill the clean water tank (pg 7). 2.
-
Page 2: Important Safety Instructions
Risk of electric shock. Direct current. Suitable for use by children at least 8 years old. For indoor use only. Recycle Li-Ion battery. Use only BISSELL® cleaning formulas intended for use with this machine. Corrugated Recycles. Protection against moving parts. Warning: Slippery surface. -
Page 3: Table Of Contents
TOOLS INCLUDED IN BOX WILL DIFFER BY MODEL To see what’s included with your purchase, check the "Carton Contents" list on the top flap of the box. Handle & Body 3-in-1 Docking Station Trial Formula(s) Extra Brush Roll (select models) global.BISSELL.com 3... -
Page 4: Product Overview
1. Dirty Tank Full 2. Error Indicator 3. Charging 4. Low Battery 5. Battery % Remaining 6. Clog Detected 7. Suction Level 8. Fluid Level 9. Brush Roll Stuck 10. Clean-Out Cycle Indicator 11. Clean Tank Empty 4 global.BISSELL.com... -
Page 5: Assembly & Charging The Battery
2. Plug the charger into a wall 3. Place machine on tray and body of machine until it clicks. outlet. ensure charging icon is lit up. 4. Let charge for 4 hours or until battery reaches 100% charge. global.BISSELL.com 5... -
Page 6: Power Vac Mode
4. Empty tank into trash can. 5. Replace strainer and return 6. Insert bottom of tank first. lid to dirty tank. Tilt tank towards machine until it clicks into place. 6 global.BISSELL.com... -
Page 7: Power Mop Mode
This machine is compatible with BISSELL® CrossWave® cleaning solutions*. Always use genuine BISSELL cleaning solutions in your machine. Other cleaning solutions may harm the machine. When using both modes in one cleaning session, start with Power Vac Mode for dry cleaning and then switch to Power Mop Mode since parts need to dry for 24 hours after use. - Page 8 6. Replace strainer and return of tank to separate debris from rinse tank and tank lid. lid to dirty tank. dirty water. Dispose of debris. 7. Insert bottom of tank first. Tilt tank towards machine until it clicks into place. 8 global.BISSELL.com...
- Page 9 Note: If brush roll is still dirty, it can be hand washed with mild detergent and place in brush roll holder on charging tray to dry. For best results, replace brush roll every 3 months. global.BISSELL.com 9...
-
Page 10: After-Cleaning Care
Insert bottom of tank into until tab on left side of brush is foot and rotating towards machine first. Tilt tank towards locked in place. machine. Press down until machine until it clicks into window clicks into place. place. 10 global.BISSELL.com... -
Page 11: Troubleshooting
Remove any accumulated hair from brush roll. Fan error Contact BISSELL Consumer Care. Battery communication error Contact BISSELL Consumer Care. The battery is to be disposed of safely. See global.BISSELL.com/batteryrecycling for battery removal instructions. global.BISSELL.com 11... -
Page 12: Limited Warranty
Consumer Law or New Zealand Consumer Laws, whichever applies to Except as set out below, BISSELL and its distributors are not liable for any you. You can find out about your legal rights and remedies by contacting loss or damage that is not foreseeable or for incidental or consequential your local consumer advice service.
Need help?
Do you have a question about the CrossWave OmniForce EDGE and is the answer not in the manual?
Questions and answers
The hole indicator panel lights up