Quick Metering Mode Selection
You can also use the following procedure to change the me-
tering mode, without going through the menu.
1.
Align the POWER/Function Switch with REC.
2.
While holding down SHIFT, press
RESIZE to cycle through the metering mode
icons on the monitor screen in the sequence
shown below.
•
(multi)
(center)
OTHER RECORDING FUNCTIONS
/
/MF
(spot)
E-86
Setting the Sensitivity Level
Use the following procedure to specify the sensitivity level.
1.
Align the POWER/Function Switch with REC.
2.
Press MENU.
3.
Select "FUNCTION"
press SET/DISP.
4.
Select the setting you want, and then press
SET/DISP.
If you want to set sensitivity at this level
ISO 100 equivalent
ISO 180 equivalent
ISO 300 equivalent
ISO 500 equivalent
"Sensitivity", and then
Select this
ISO 100
ISO 180
ISO 300
ISO 500