Basic Image Recording; Recording A Simple Snapshot - Casio QV-3500EX User Manual

This section describes the basic procedure for recording an
image.

Recording a Simple Snapshot

The camera's Program AE Mode (P Mode) is for simple
snapshots. In this mode, the camera automatically sets the
shutter speed and aperture for you in accordance with sub-
ject brightness.
1.
Before turning on the camera, remove its lens
cap.
2.
Align the POWER/
Function Switch with
REC.
REC : Turns on power and
enters the REC mode.
PLAY : Turns on power and
enters the PLAY mode.
OFF : Turns off power.

BASIC IMAGE RECORDING

BASIC IMAGE RECORDING
REC
PLAY
OFF
3.
Compose the image on the monitor screen so
the point on which you want to focus is inside
the Focus frame.
• If you are using the viewfinder to compose the image,
align the viewfinder's auto focus frame with the sub-
ject you want to focus.
• If you are using the viewfinder to compose the subject,
press SET/DISP twice to turn off the monitor screen.
4.
Press the shutter
release button about
half way and hold it
there to perform auto
focus.
E-48
Focus
frame
Shutter release button