Casio QV-3500EX User Manual page 49

• The monitor screen momentarily goes blank when
you press the shutter release button half way.
• The camera's Auto Focus feature automatically
focuses the image.
• You can find out the
status of the Auto Focus
operation by checking the
color of the focus frame
and the status of the
operation lamp.
If you see this
Green focus frame and green
operation lamp
Red focus frame and green
operation lamp
• Take care that you do not
block the lens or the
sensors with your fingers
as you hold the camera.
• See "Using the Macro Mode" on page E-60 for infor-
mation about shooting close-ups.
BASIC IMAGE RECORDING
MENU
Operation lamp
It means this
The image is in focus.
The image is not in focus.
E-49
5.
After confirming that
the image is in focus,
press the shutter
release button all the
way down to record the
image.
• Recorded images are temporarily stored in a buffer
from which they are stored to the memory card. You
can continue to shoot consecutive images as long as
there is space available in the buffer.
• The number of images you can store in the camera
depends on the storage medium and the image quality
setting (page E-64) you are using.
• To avoid hand movement, press the shutter release
button gently.
• Use of a tripod is recommended for slow shutter
speeds and telephoto shots to avoid blurring of the
image due to camera movement.
Camera Shake Indicator
The (camera shake indicator) appears on the monitor
screen when the zoom slider is set to T (telephoto) or when a
slow shutter speed is being used.
• If the camera shake indicator
avoid camera movement.
appears, use a tripod to