Specifying Image Size and Quality
You can specify the image size and image quality to suit the
type of image you are recording.
1.
Align the POWER/Function Switch with REC.
2.
Press MENU.
3.
Select "FUNCTION"
press SET/DISP.
4.
Select the size and quality setting you want,
and then press SET/DISP.
Size/Quality Setting and Image Capacity (JPEG images only)
Image
File size
size
Quality
(pixels)
2048
FINE
1.4MB
x
NORMAL
1MB
1536
ECONOMY
600KB
1024
FINE
350KB
x
NORMAL
250KB
768
ECONOMY
150KB
BASIC IMAGE RECORDING
"Size/Quality", and then
Number of images
8MB
64MB
340MB
memory card
memory card
Microdrive
5
43
245
6
60
342
11
99
562
19
167
943
27
229
1292
43
365
2054
IMPORTANT!
• The values in the table are all approximate, and are
affected by the types of images you record and other
factors.
• Saving two versions of an image in JPEG and TIFF
formats creates a file that is very large, and greatly
reduces storage capacity (page E-93).
• To determine the number of images that can be stored
on a memory card of a different capacity, multiply the
capacities in the table, by the appropriate value.
• Note that the maximum number of images that can be
stored in a single folder is 250. Because of this, even
if you are using a card that allows storage of more
than 250 images, the camera's monitor screen will
show its capacity for up to 250 images only.
• The number of images that can be recorded may differ
from the values shown above when you use Card
Browser (page E-134).
E-64