Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Charge Amps Luna
Summary of Contents for Charge Amps Luna
- Page 1 Charge Amps Luna User Manual English www.chargeamps.com...
- Page 2 Neglecting to follow and carry out the directions, instructions and safety precautions in this Installation Manual implies that any warranty provisions will be cancelled and that Charge Amps AB can reject any and all claims for compensation in connection with any injuries/damage or incidents – direct or indirect –...
- Page 3 Safety WARNING: Read all instructions before installation! • Improper use may create a risk of personal injury. • The product must only be installed by a qualified electrician in accordance with the installation manual. • National usage requirements and restrictions apply. •...
-
Page 4: Technical Data
English 2 Technical data Charging mode Mode 3 EV power supply identifier Metering 1 to 3 phase voltage, current and power Socket Type 2, 22 kW Rated voltage (U 230/400 V Rated insulation voltage (U 250/400 V Rated impulse withstand voltage 4 kV Rated frequency (f 50 Hz... - Page 5 English Wi-Fi Type: 802.11 b/g/n/ax Range: 2412 – 2484 MHz Max output: 20.5/20.0/19.0/19.0 dBm@802.11b/g/n/ax Cellular networks communications Type: LTE-FDD and GSM Supported bands: B3/B7/B8/B20/B28 Range: 703–915/1710–1785/2500– 2570 MHz Max output: 25 dBm @LTE-FDD, 35 dBm @GSM. SIM-card: built-in Communication protocol OCPP 1.6J ISO 15118 hardware ready The charging power is subject to external conditions, such as outside...
-
Page 6: Product Overview
3 Product overview Front cover EV socket Illuminated Charging unit logotype RFID reader Status LED... -
Page 7: Package Contents
3.1 Package contents RFID tag Strain relief 2x long screw 2x short screw... - Page 8 Front cover Installation lid Charging unit Drill template Accessories bag: • 1x RFID tag • 1x Strain relief • 2x long screw (PT40x30) • 2x short screw (PT40x14) Additional contents: • Quick Guide • Welcome letter...
- Page 9 N.B: Make sure your installer has given you the access to Charge Amps Admin Portal to be able to manage RFID tags. 1. Log in to the Charge Amps Admin portal to add an RFID tag: https://my.charge.space/admin 2. Navigate to the charger page to turn on the RFID lock 4.3 Charging with RFID identification...
-
Page 10: Cable Lock
4.4 Cable lock During charging, the cable lock is automatically activated. If you wish to lock the cable permanently, log into your Charge Amps User portal to lock the cable: • https://my.charge.space/userapp/ N.B: In case of power loss, an already locked cable will remain locked. -
Page 11: Cloud Connectivity
4.5 Cloud connectivity Charge Amps Installer App and Charge Amps Cloud are available for Charge Amps Luna connected to Charge Amps as the cloud provider. Charge Amps App Please download Charge Amps App, available in App store and Google Play, for full control, adjusting settings and enabling smart charging and scheduling. -
Page 12: Earth Fault Detection
2. A steady green light will show on the Status LED which indicates that the RCD has been reset. 4.6.2 Test the internal RCD The built-in RCD function of Charge Amps Luna needs to be tested twice a year by following the steps below. Recommended tools: •... - Page 13 1. Use the flat screwdriver to carefully bend the Front cover open. 2. Remove the front cover.
- Page 14 3. Connect the electric vehicle, or test tool, to Charge Amps Luna using the charging cable. 4. If RFID authentication is enabled, briefly hold the RFID tag in front of the RFID reader to initiate a charging session. 5. When the charging session has started, press the test button marked ”T”...
- Page 15 9. Reassemble Charge Amps Luna by carefully pressing the Front cover in place.
-
Page 16: Led Indications
4.7 LED indications 4.7.1 General Status Status LED Starting up Green pulsating light Ready for charging Green steady light Charging Blue pulsating light Charging complete Yellow steady light Charging paused by EV Yellow steady light Charging paused by charger Blue steady light 4.7.2 RFID tag verification Status Status LED... -
Page 17: Maintenance
5 Maintenance N.B: Never spray water or any other liquid directly on the product. • Visually check that the EV socket-outlet is free from damage. • The outside of the product must be regularly wiped with a clean, dry cloth to remove dirt and dust. •... - Page 18 Charge Amps AB (publ) Frösundaleden 2B, 8th floor SE–169 75 Solna, Sweden Doc. Nr: 131591 © Copyright Charge Amps AB. Rev: 01 All rights reserved...
Need help?
Do you have a question about the Luna and is the answer not in the manual?
Questions and answers